MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH
MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH
MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
V1.000, 10.2011<br />
<strong>MDrive</strong>Plus <strong>EtherNet</strong>/<strong>IP</strong> 2 Before you begin - safety information<br />
2.5 Standards and terminology<br />
Integrated <strong>Motion</strong> System<br />
Technical terms, terminology and the corresponding descriptions in<br />
this manual are intended to use the terms or definitions of the pertinent<br />
standards.<br />
In the area of drive systems, this includes, but is not limited to, terms<br />
such as “safety function”, “safe state”, “fault”, “fault reset”, “failure”, “error”,<br />
“error message”, “warning”, “warning message”, etc.<br />
Among others, these standards include:<br />
• IEC 61800 series: “Adjustable speed electrical power drive<br />
systems”<br />
• IEC 61800-7 series: “Adjustable speed electrical power drive<br />
systems - Part 7-1: Generic interface and use of profiles for<br />
power drive systems - Interface definition”<br />
• IEC 61158 series: “Industrial communication networks - Fieldbus<br />
specifications”<br />
• IEC 61784 series: “Industrial communication networks - Profiles”<br />
• IEC 61508 series: “Functional safety of electrical/electronic/programmable<br />
electronic safety-related systems”<br />
13
Change language