MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH

V1.000, 10.2011
11 Service, maintenance and disposal
11.1 Service address
11.2 Maintenance
11.3 Replacing units
62
MDrivePlus EtherNet/IP
If you cannot resolve an error yourself please contact your sales office.
Have the following details available:
• Nameplate (type, identification number, serial number)
• Type of error (such as LED flash code or error number)
• Previous and concomitant circumstances
• Your own assumptions concerning the cause of the error
Also include this information if you return the product for inspection or
repair. Note that units being returned for inspection or repair must be
accompanied by a Return Material Authorization (RMA).
Technical or applications support is available via the internet at:
http://www.schneider-electric-motion.us
Check the product for pollution or damage at regular intervals, depending
on the way you use it.
UNINTENDED BEHAVIOR
The behavior of the drive system is governed by numerous stored
data or settings. Unsuitable settings or data may trigger unexpected
movements or responses to signals and disable monitoring
functions.
• Do NOT operate the drive system with unknown settings or
data.
• Verify that the stored data and settings are correct.
• When commissioning, carefully run tests for all operating
states and potential fault situations.
• Verify the functions after replacing the product and also after
making changes to the settings or data.
• Only start the system if there are no persons or obstructions
in the hazardous area.
Failure to follow these instructions can result in death or
serious injury.
Integrated Motion System