MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH
MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH
MDrive 23 Plus2 EtherNet/IP - Koco Motion GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
V1.000, 10.2011<br />
<strong>MDrive</strong>Plus <strong>EtherNet</strong>/<strong>IP</strong> 3 Technical data<br />
3 Technical data<br />
3.1 Environmental conditions<br />
Integrated <strong>Motion</strong> System<br />
This chapter contains information on the ambient conditions and on the<br />
mechanical and electrical properties of the device family and the accessories.<br />
Ambient operating conditions The maximum permissible ambient temperature during operation<br />
depends on the distance between the devices and the required power.<br />
Observe the pertinent instructions in the chapter Installation.<br />
Ambient conditions: transportation and<br />
storage<br />
The following relative humidity is permissible during operation.<br />
Operating temperature [°C] -20 ... 50 (no icing)<br />
Temperature variation [°C/min] 0.5<br />
Humidity [%] 5 ... 95 (non-condensing)<br />
The environment during transport and storage must be dry and free from<br />
dust. The maximum vibration and shock load must be within the specified<br />
limits.<br />
Temperature [°C] -25 ... 70<br />
Temperature variation [°C] -25 ... 30<br />
Humidity [%] 5 ... 95 (non-condensing)<br />
3<br />
15
Change language