TT CME Gateway System Administration Manual - Trading ...

3 Configuring Global Settings
Verifying Fill Server
Rollover Settings
CME Gateway System Administration Manual 51
Trading Technologies International, Inc.
Failure to restart the Price and Fill Servers after changing the Aconfig time zone
setting can result in missing fills.
For the latest product rollover times, refer to: http://www.cmegroup.com/trading_hours/
index.html
Note: When combining CBOT and CME channels on CME Gateway 7.15.0 or higher,
you need to configure a single Fill Server rollover time for all products traded on
the gateway.
To verify that the Fill Server Rollover occurs at the proper time, locate the
following entry in the FillServer.log file:
Example: FillServer.log file
01.01.2008 15:25:00.671 | FILLSERVER/PROD | 3016 | INFO
| 00000000 | Automatic rollover in 86400000 ms at: 2008/
01/02 21:25:00 local time
Since the Fill Server is not running at 21:25:00 UTC, the Fill Server Rollover
actually occurs at 15:25:00 Central Standard Time (UTC-6), when TTChron
restarts the Fill Server.
Note: Because the CME Interest Rate and Currency products have not yet ended their trading
session:
• Any fills received between 3:25pm and 4:00pm will be considered by the TT Fill Server
as fills from the next day’s session.
• If an X_TRADER® is restarted between 3:25pm and 4:00pm, all of its fills received prior
to 3:25pm will not be displayed.
If you wish to modify the rollover settings to occur after the close of CME Interest Rate and
Currency products, please contact your local TAM.