1. D-BACS - Daikin

intelligent Touch Controller
Title Description Remarks
Timing of E-mail
message
transmission
Timing of setting E-mail message
The following figure presents an example of timing the setting of an E-mail message.
[Sending message when an abnormality has occurred under normal conditions]
If an abnormality occurs in a target group of mail messages being sent, the system
waits for 3 minutes since the first abnormality ((1) in the figure) before sending a
mail message.
* A mail message is not sent immediately after the occurrence of an abnormality.
If any abnormality occurs in other groups ((2) and (3) in the figure) during the 3-minute
waiting period, the abnormalities are notified collectively via a single E-mail message.
[Resending a mail message]
As shown in group B, if an abnormality continues after a time interval has elapsed
since transmission of the first mail message, a mail message is resent.
In addition, if a group recovers from an abnormality after sending a mail message and
another abnormality recurs in the same group ((5) in the figure), the latest abnormality
is sent in the message after the sending interval has elapsed.
If another abnormality occurs within the time interval of sending messages ((4) in the
figure), the abnormality is sent in the message after the sending interval has elapsed.
If no abnormality is detected after the sending interval has elapsed, the system stops
sending messages and reverts back to normal.
*: The symbol in the figure indicates the occurrence of an abnormality,
while the symbol in the figure indicates recovery from the same.
Normal
condition
Group A
Group B
Group C
Group D
Re-sending conditions
3 minutes since
the occurrence of
an abnormality
Sending interval
�
�
�
Send abnormality
of groups A, B,
and C
�
�
Timing of E-mail transmission
Sending interval
Send abnormality of
groups B, C, and D
Group B: Abnormality
continues
Group C: Abnormality
recurred
Group D: Another
abnormality
occurred
Normal
condition
If no abnormality is
detected, the
system stops
sending messages
and reverts to
normal conditions
to monitor the air
conditioner.
121