26.12.2012 Views

1. D-BACS - Daikin

1. D-BACS - Daikin

1. D-BACS - Daikin

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

5.2 Flow Chart to Determined the Number of Units to Connected<br />

Fundamental of DIII-NET<br />

CHECK SHEET FOR NUMBER OF UNIT IN ONE SYSTEM<br />

Centralized controller<br />

Central remote controller (Note 1)<br />

Unified ON/OFF controller<br />

Schedule timer<br />

Interface for use in BACnet ® No. of IPU of intelligent Manager<br />

Qty Y/N<br />

≤2<br />

× 10 =<br />

≤2<br />

× 10<br />

=<br />

≤8<br />

× 1 (A)<br />

=<br />

≤1<br />

× 10<br />

=<br />

(Note 3)<br />

≤1<br />

× 10<br />

=<br />

Interface for use of LONWORKS × 10<br />

=<br />

Parallel interface<br />

≤4<br />

Total<br />

≤7<br />

≥8<br />

+ + + = ≤ 200<br />

Unit<br />

Qty Y/N<br />

®<br />

intelligent Touch Controller (Note1)<br />

VRV<br />

SkyAir with adaptor<br />

HRV(VAM)<br />

Wiring adaptor for other air conditioner<br />

BS unit (Note 2)<br />

Optional DIII Ai unit<br />

Total<br />

Outdoor unit<br />

RXY-M, RXYQ-M(A), REYQ-M<br />

RX-M, RXQ-MA<br />

Other adaptors<br />

Total<br />

External control adaptor for outdoor unit<br />

Wiring adaptor for electrical appendices(1)<br />

Di unit<br />

Dio unit<br />

Ai unit<br />

Total<br />

Qty Y/N<br />

Qty Y/N<br />

8×<br />

4×<br />

≤128<br />

≤10 (B)<br />

≤10<br />

Note 1:<br />

Condition<br />

(A) means;<br />

� Central control equipment + Indoor units + Outdoor units + other adaptors ≤ 160 units<br />

� Conversion number of central control equipment + Indoor units + Outdoor units + other adaptors ≤ 200 units<br />

(B) means;<br />

In case of connecting to DIII-NET<br />

� Outdoor units must be counted to one system even in case of including 3 units. (Master + Master + Master = One<br />

system)<br />

� The outdoor units connected by terminal Ex. Q1, Q2 (excepting terminal F1, F2) are regarded as one system.<br />

Note:<br />

<strong>1.</strong> When one system is to be controlled from two locations, up to two intelligent Touch Controller (In case of combining<br />

the intelligent Touch Controller and Central Remote Controller, it is restricted to combine two Controllers in total), four<br />

Central Remote Controller and 16 unified ON/OFF Controller can be connected. However, the maximum number of<br />

units that can be controlled is 128.<br />

2. When a BS unit is used, the indoor units used in its downstream are not counted.<br />

3. One port of one Interface for use in BACnet ® can have up to 64 groups (64 master indoor units with address). In case<br />

of adopting group controlling, the circuit covered by the data station can have up to 128 indoor units including main<br />

and sub units.<br />

5.2 Flow Chart to Determined the Number of Units to Connected 37<br />

(V2304)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!