Web Gateway 7.1.5 Product Guide - McAfee

Add as many parameters as needed. A parameter can be a:
Rules and rule sets
Rule configuration 4
• Value (String, Boolean, or numerical) — Configure it in the Value area. Then click OK.
• Property — Follow the instructions for configuring properties, beginning again with Step 4.
6 From the Operator list, select an operator.
7 In the Parameter area, add a parameter (also known as operand). This can be a:
• Value (String, Boolean, or numerical) — Configure it in the Value area.
• Property — Follow the instructions for editing properties, beginning again with Step 4.
8 Click OK to close the Add Criteria window.
Note: Repeat steps 3 to 8 to add more criteria parts for complex criteria. Connect them by AND or OR
(these options are then provided) and, for three or more criteria parts, type brackets to indicate how they
are logically connected in the Criteria Combination field (appears then).
9 Continue with another adding procedure, preferably with Add an action, or click Finish and then Save
Changes.
Add an action
Complete the following procedure to add an action to a rule:
1 In the Add Rule window, select Action.
Figure 4-9 Add Rule – Action
2 Use the following items to configure an action:
• Action — List for selecting an action:
• Continue — Continues with processing the next rule
• Block — Blocks access to an object and stops processing rules
• Redirect — Redirects the client that requested access to an object to another object
• Authenticate — Stops processing the current cycle and sends an authentication request
• Stop Rule Set — Stops processing the current rule set and continues with the next rule set
McAfee Web Gateway 7.1.5 Product Guide 101