Web Gateway 7.1.5 Product Guide - McAfee

More documents

Recommendations

Info

8 Monitoring Error handling Check CPU Overload This nested error handling rule set handles measures that are taken when the CPU load exceeds a configured value. Nested error handling rule set — Check CPU Overload Criteria — Statistics.Counter.GetCurrent(“CPULoad”) greater than or equals 95 The rule set criteria specifies that the rule set applies when the value of the Statistics.Counter. GetCurrent property for CPU load is 95 or higher. This value indicates the percentage of the maximum load that the CPU is currently running with. The Statistics module, which provides the value, runs with default settings, as is specified after the CPU Load property parameter. The rule set contains the following rules: Create notification message Always –> Continue — Set User-Defined.loadMessage = “CPU load at “ + Number.ToString (Statistics.Counter.GetCurrent(“CPULoad”)) + “%” The rule is always executed when the criteria of its rule set is matched. The rule then uses an event to set a user-defined property to a chain of values that make up a message text on the CPU overload. The Continue action lets processing continue with the next rule. Send SNMP trap and other rules Always –> Continue — ... The Send SNMP trap rule and other rules in the rule set are always executed when the rule set criteria is matched. The rules then use different events for taking measures to make the administrator aware of the CPU overload. Note: These rules are not enabled by default. Check Cache Partition This nested error handling rule set handles measures that are taken when the web cache usage exceeds a configured value. Nested error handling rule set — Check Cache Partition Criteria — Statistics.Counter.GetCurrent(“WebCacheDiskUsage”) greater than or equals 95 The rule set criteria specifies that the rule set applies when the value of the Statistics.Counter. GetCurrent property for web cache usage is 95 or higher. This value indicates the percentage of the maximum allowed usage of the web cache that is currently in use. The Statistics module, which provides the value, runs with default settings, as is specified after the WebCacheDiskUsage property parameter. 308 McAfee Web Gateway 7.1.5 Product Guide
The rule set contains the following rules: Create notification message Monitoring Error handling 8 Always –> Continue — Set User-Defined.cacheMessage = “Cache partition usage at “ + Number.ToString (Statistics.Counter.GetCurrent(“WebCacheDiskUsage”)) + “%” The rule is always executed when the criteria of its rule set is matched. The rule then uses an event to set a user-defined property to a chain of values that make up a message text on the web cache usage. The Continue action lets processing continue with the next rule. Send SNMP trap and other rules Always –> Continue — ... The Send SNMP trap rule and other rules in the rule set are always executed when the rule set criteria is matched. The rules use different events for taking measures to make the administrator aware of the web cache usage. Note: These rules are not enabled by default. Check Request Overload This nested error handling rule set handles measures that are taken when the number of requests processed on the appliance per second exceeds a configured value. Nested error handling rule set — Check Request Overload Criteria — Statistics.Counter.GetCurrent(“HttpRequests”) greater than or equals 480000 The rule set criteria specifies that the rule set applies when the value of the Statistics.Counter. GetCurrent property for requests is 480,000 or higher. This value is the number of requests that are currently processed one the appliance per second. The Statistics module, which provides the value, runs with default settings, as is specified after the HttpRequests property parameter. The rule set contains the following rules: Create notification message Always –> Continue — Set User-Defined.requestsPerSecond = Statistics.Counter.GetCurrent(“HttpRequests”)) / 60 Set User-Defined.requestLoadMessage = “detected high load: ” + Number.ToString (User-Defined.requestsPerSecond) + “requests per second” The rule is always executed when the criteria of its rule set is matched. The rule then uses two events to set user-defined properties. One of these properties is set to the number of requests that are currently processed on the appliance per second. The other is set to a chain of values that make up a message text on this number. The Continue action lets processing continue with the next rule. McAfee Web Gateway 7.1.5 Product Guide 309
Page 1 and 2:
Product Guide McAfee ® version 7.1
Page 3 and 4:
Contents Preface 9 About this guide
Page 5 and 6:
Contents Standard authentication .
Page 7 and 8:
Contents Create an error handler .
Page 9 and 10:
Preface About this guide This Produ
Page 11 and 12:
Table i-2 Acronyms (continued) Acro
Page 13 and 14:
1 Introduction Contents Comprehensi
Page 15 and 16:
Deployment of the McAfee Web Gatewa
Page 17 and 18:
Operating system Introduction Filte
Page 19 and 20:
Introduction Chapters of this guide
Page 21 and 22:
2 Setup and logon Contents Setting
Page 23 and 24:
Setup and logon Setting up the McAf
Page 25 and 26:
Installing the appliance software S
Page 27 and 28:
2 Review the summary that is displa
Page 29 and 30:
Import a license Setup and logon Lo
Page 31 and 32:
Main elements of the user interface
Page 33 and 34:
Setting up system management tools
Page 35 and 36:
Setup and logon Setting up system m
Page 37 and 38:
3 Proxies and caching Contents Inte
Page 39 and 40:
Explicit proxy mode Proxies and cac
Page 41 and 42:
Table 3-1 WCCP Services list (conti
Page 43 and 44:
Proxies and caching Network modes 3
Page 45 and 46:
Transparent bridge mode Proxies and
Page 47 and 48:
Page 49 and 50:
Transparent router mode Proxies and
Page 51 and 52:
Page 53 and 54:
Common proxy settings Proxies and c
Page 55 and 56:
Proxies and caching Common proxy se
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
8 Make sure the following is config
Page 63 and 64:
Proxies and caching Reverse HTTPS p
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Proxies and caching Providing proxy
Page 73 and 74:
Preventing data leaks Proxies and c
Page 75 and 76:
Web caching Proxies and caching Web
Page 77 and 78:
Bypass lists for web caching Proxie
Page 79 and 80:
Verify the enabling of the web cach
Page 81 and 82:
4 Rules and rule sets Contents Filt
Page 83 and 84:
Rules and rule sets Filtering contr
Page 85 and 86:
Modules for delivering filtering in
Page 87 and 88:
Rules on the user interface On the
Page 89 and 90:
Property of a URL Property — URL.
Page 91 and 92:
About rule sets Rules and rule sets
Page 93 and 94:
Rules and rule sets About rule sets
Page 95 and 96:
Table 4-4 Rule set library Rule set
Page 97 and 98:
The Rule Sets toolbar provides the
Page 99 and 100:
Add name, comment, and enabling Com
Page 101 and 102:
Add as many parameters as needed. A
Page 103 and 104:
3 Select Event. The Add Event windo
Page 105 and 106:
Adding the action 9 Select Action.
Page 107 and 108:
Rules and rule sets Rule configurat
Page 109 and 110:
Add a new rule set You can also cre
Page 111 and 112:
List maintenance Rules and rule set
Page 113 and 114:
Add a list Complete the following p
Page 115 and 116:
Action and engine settings Rules an
Page 117 and 118:
Access restrictions Rules and rule
Page 119 and 120:
5 Filtering users Authentication an
Page 121 and 122:
Authentication and access managemen
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Module for authenticating users Aut
Page 129 and 130:
Page 131 and 132:
LDAP Settings specifying the LDAP m
Page 133 and 134:
Novell eDirectory Settings specifyi
Page 135 and 136:
Kerberos Settings specifying the Ke
Page 137 and 138:
Table 5-8 Certificate Authorities l
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Administrator accounts Authenticati
Page 167 and 168:
Page 169 and 170:
6 Web filtering Contents Filtering
Page 171 and 172:
Virus and malware filtering Web fil
Page 173 and 174:
Web filtering Virus and malware fil
Page 175 and 176:
Page 177 and 178:
Whitelists for virus and malware fi
Page 179 and 180:
Page 181 and 182:
Module for virus and malware filter
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
URL filtering Web filtering URL fil
Page 189 and 190:
Web filtering URL filtering 6 The B
Page 191 and 192:
Modify a filtering rule to block un
Page 193 and 194:
Web filtering URL filtering 6 Add a
Page 195 and 196:
Module for URL filtering Web filter
Page 197 and 198:
Web filtering URL filtering 6 Advan
Page 199 and 200:
Different versions of URL category
Page 201 and 202:
Web filtering Media type filtering
Page 203 and 204:
Web filtering Media type filtering
Page 205 and 206:
Lists for media type filtering Web
Page 207 and 208:
HTML filtering Web filtering HTML f
Page 209 and 210:
Web filtering HTML filtering 6 Embe
Page 211 and 212:
Break; User-Defined.removeOneScript
Page 213 and 214:
Media Type String Blocklist List of
Page 215 and 216:
Global whitelists Web filtering Glo
Page 217 and 218:
Web filtering SSL scanning 6 Handle
Page 219 and 220:
Block untrusted certificate authori
Page 221 and 222:
Web filtering SSL scanning 6 Verify
Page 223 and 224:
Modules for SSL scanning Web filter
Page 225 and 226:
Web filtering SSL scanning 6 SSL Cl
Page 227 and 228:
8 Click OK. The window closes and t
Page 229 and 230:
The rule set contains the following
Page 231 and 232:
Bandwidth throttling Web filtering
Page 233 and 234:
Next-hop proxies Web filtering Supp
Page 235 and 236:
Web filtering Supporting functions
Page 237 and 238:
User messages Web filtering User me
Page 239 and 240:
The following table describes the o
Page 241 and 242:
Table 6-25 Template Editor (continu
Page 243 and 244:
Web filtering User messages 6 Redir
Page 245 and 246:
7 System configuration Contents Con
Page 247 and 248:
System settings System configuratio
Page 249 and 250:
Table 7-4 List of sections on syste
Page 251 and 252:
License system settings System conf
Page 253 and 254:
Network Protection system settings
Page 255 and 256:
System configuration System setting
Page 257 and 258: Database updates Table 7-13 File Ed
Page 259 and 260: System configuration Database updat
Page 261 and 262: Configure central management settin
Page 263 and 264: System configuration Central manage
Page 265 and 266: Scheduled job settings This section
Page 267 and 268: System configuration Central manage
Page 269 and 270: 8 Monitoring Contents Monitoring th
Page 271 and 272: Monitoring Dashboard 8 Overview of
Page 273 and 274: Charts and Tables tab Monitoring Da
Page 275 and 276: Table 8-4 Overview of charts and ta
Page 277 and 278: Logging Monitoring Logging 8 Applia
Page 279 and 280: Sample logging rule Monitoring Logg
Page 281 and 282: 13 Configure the following for the
Page 283 and 284: Monitoring Logging 8 4 Go to Policy
Page 285 and 286: + Number.ToString (Block.ID) + “
Page 287 and 288: Create a rule for setting text as t
Page 289 and 290: Monitoring Logging 8 • In the Con
Page 291 and 292: Configuring log file settings Monit
Page 293 and 294: Monitoring Logging 8 Auto Pushing S
Page 295 and 296: Log handler rule sets Monitoring Lo
Page 297 and 298: Performance measurement Monitoring
Page 299 and 300: Monitoring Performance measurement
Page 301 and 302: Transferring data to an ePO server
Page 303 and 304: Event monitoring with SNMP Monitori
Page 305 and 306: Error handling Table 8-7 Trap Sinks
Page 307: Rule sets for error handling Monito
Page 311 and 312: Monitoring Error handling 8 Handle
Page 313 and 314: Monitoring Error handling 8 Block o
Page 315 and 316: 9 Troubleshooting Contents Troubles
Page 317 and 318: Enable the creation of connection t
Page 319 and 320: List of actions Appendix: Configura
Page 321 and 322: Table A-2 List of error IDs (contin
Page 323 and 324: Table A-3 List of events (continued
Page 325 and 326: Table A-3 List of events (continued
Page 327 and 328: List of incident IDs Appendix: Conf
Page 329 and 330: Table A-4 List of incident IDs (con
Page 331 and 332: Table A-5 List of properties (conti
Page 359 and 360:
Table A-5 List of properties (conti
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Wildcard expressions Appendix: Conf
Page 369 and 370:
Table A-6 List of important special
Page 371 and 372:
Table A-7 List of important special
Page 373 and 374:
Index A access restrictions 117 act
Page 375 and 376:
I ICAP server, see proxies ICQ, see
Page 377 and 378:
SNMP monitoring 303 SSL scanning Ce
Page 380:
700-3299A00
show all

Web Gateway 7.1.5 Product Guide - McAfee

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?