Web Gateway 7.1.5 Product Guide - McAfee

Add name, comment, and enabling
Complete the following procedure to add general settings to a rule:
1 Go to Policy | Rule Sets.
2 On the rule sets tree, select a rule set for the new rule.
3 Click Add Rule. The Add Rule window opens with the first step selected.
4 Add the following:
• Name — Name of the rule
• Enable rule — When selected, the rule is enabled
• [Optional] Comment — Plain-text comment on the rule
Rules and rule sets
Rule configuration 4
Continue with another step, preferably with Add the criteria, or click Finish and then Save Changes.
Add the criteria
Complete the following procedure to add the criteria to a rule:
1 In the Add Rule window, select Rule Criteria.
Figure 4-6 Add Rule – Criteria
2 In the Apply this rule section, configure when the rule is applied:
• Always — The rule is always applied.
• If the following criteria is matched — The rule is applied if the criteria configured below is
matched.
McAfee Web Gateway 7.1.5 Product Guide 99