Web Gateway 7.1.5 Product Guide - McAfee

Proxies and caching
Reverse HTTPS proxy configuration 3
Create a rule for the Enable Next Hop proxy event
To create a rule that triggers the Enable Next Hop proxy event when a server from the list of protected
web servers is requested, proceed as follows:
1 Go to Policy | Rule Sets.
2 On the rule sets tree, select the Next Hop Proxy rule set. The rules within this rule set appear on
the settings pane.
3 Click Add Rule. The Add Rule window opens.
4 Under Name, enter a name for the new rule, for example, Address protected web servers as next
hop proxies.
5 Under Rule Criteria, select If the following criteria is matched, then click Add. The Add Criteria
window opens.
6 Configure the rule criteria as follows:
• From the Property list, select URL.Host.
• From the Operator list, select does not match in list.
• From the Value list under Parameter, select the web server list you configured, for example,
Protected web servers.
7 Click OK. The window closes and the new criteria appears under Rule Criteria.
8 Under Action, leave Continue (default).
9 Under Events, click Add and then Event. The Add Event window opens.
10 Configure an event as follows:
• From the Event list, select Enable Next Hop Proxy.
• From the Settings list, select the settings you configured, for example, Protected web servers.
11 Click OK. The window closes and the new event appears under Events.
12 Click Finish. The Add Rule window closes and the new rule is added to the rules of the Next Hop Proxy
rule set.
13 Click Save Changes.
McAfee Web Gateway 7.1.5 Product Guide 69