Web Gateway 7.1.5 Product Guide - McAfee

3 Select Event. The Add Event window opens.
Figure 4-11 Add Event window
4 Use the following items to configure an event:
Note: Repeat this part of the procedure to add more than one event.
• Event — List for selecting an event (event types shown in brackets)
Rules and rule sets
Rule configuration 4
• Parameters — Opens the Property Parameters window for adding up to three parameters, see
Step 5
Note: The icon is grayed out if the event has no parameters.
• Settings — List for selecting settings for an event
Note: The icon is grayed out if no settings are required for an event.
• Add — Opens the Add Settings window for adding new settings to the list
• Edit — Opens the Edit Settings window for edit ing the selected settings
If no parameters need to be configured for the event, click OK and continue with Step 6.
5 [Conditional] To add parameters to an event:
a Click Parameters. The Property Parameters window opens:
b Add parameters as needed. A parameter can be a:
• Value (String, Boolean, or numerical): — Configure it inthe Value area. Then click OK.
• Property — Configure it in the Property area. Then click OK.
6 [Conditional] If this is the last of the adding procedures:
a [Optional] In the Add Rule window, select Summary to review what you have configured.
b Click Finish and then Save Changes.
Otherwise continue with another adding procedure.
McAfee Web Gateway 7.1.5 Product Guide 103