01.01.2013 Views

Web Gateway 7.1.5 Product Guide - McAfee

Web Gateway 7.1.5 Product Guide - McAfee

Web Gateway 7.1.5 Product Guide - McAfee

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3<br />

Proxies and caching<br />

Network modes<br />

Set up a scanning node<br />

To configure an appliance as a scanning node in transparent bridge mode, you need to enable this<br />

mode and configure an IP address that allows the node to access the network interface of the director<br />

node. The scanning role is configured by giving the node 0 as a priority value.<br />

Complete the following procedure to set up a scanning node:<br />

1 Go to Configuration | Appliance.<br />

2 On the appliances tree, go to the appliance you want to set up as a scanning node and select Proxies<br />

(HTTP(S), FTP, ICAP, and IM).<br />

3 Under Network Setup, select Transparent Bridge.<br />

Note: After selecting this mode, specific Transparent Bridge settings appear below the Network Setup<br />

settings.<br />

4 Set Director priority to 0.<br />

5 Configure the same HTTP and FTP proxy ports and port redirects as for the director node.<br />

6 Configure also IP spoofing in the same way as for the director node.<br />

7 Click Save Changes.<br />

48 <strong>McAfee</strong> <strong>Web</strong> <strong>Gateway</strong> <strong>7.1.5</strong> <strong>Product</strong> <strong>Guide</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!