Web Gateway 7.1.5 Product Guide - McAfee

More documents

Recommendations

Info

Appendix: Configuration lists List of events Table A-3 List of events (continued) Name Description Parameters SNMP.Send.Trap.User Sends an SNMP trap message with user information 1. Number: User ID 2. String: Message body SNMP.Send.Trap. Sends an SNMP trap message with information on 1. Number: User ID UserHost host of a user 2. String: Message body 3. IP: IP address of the host Statistics.Counter. Increments a counter 1. String: Counter name Increment 2. Number: Increment value Statistics.Counter. Reset Resets a counter String: Counter name Stopwatch.Reset Sets an internal watch that measures processing time for rule sets to zero String: Rule set name Stopwatch.Start Starts an internal watch that measures processing time for rule sets String: Rule set name Stopwatch.Stop Stops an internal watch that measures processing time for rule sets String: Rule set name Syslog Writes an entry into syslog 1. Number: Log level 0 – Emergency 1 – Alert 2 – Critical 3 – Error 4 – Warning 5 – Notice 6 – Info 7 – Debugging 2. String: Log entry 326 McAfee Web Gateway 7.1.5 Product Guide
List of incident IDs Appendix: Configuration lists List of incident IDs The following table provides a list of the incident IDs that can be used in web security rules on the appliance. The incident IDs are grouped in numerical ranges as follows: 1–199: Incidents related to the appliance system 200–299: Core subsystem incidents 300–399: Update module incidents 500–599: Log File Manager incidents 600–699: sysconfd daemon incidents 700–799: Proxy module incidents 800–899: Virus and malware filtering incidents 900-999: Authentication incidents 1000–1099: URL filtering incidents 1600–1699: SSL certification incidents 3000–3200: Central management incidents For more information on how to use incident IDs and other incident properties, see Error handling using incidents. For individual incident properties, see List of properties. Table A-4 List of incident IDs Incident ID Description Origin number and name Severity 5 A rule that uses an incident property has been executed. 1 System 7 20 RAID monitoring reports critical status or failure of one 1 Health monitor 4 (or 3 for or more hard disks. hard-disk failure) 21 S.M.A.R.T health check reports an error on a HDD hard disk. 1 Health monitor 4 22 File system usage exceeds a configured limit. 1 Health monitor 4 23 Memory usage exceeds a configured limit. 1 Health monitor 4 24 System load exceeds a configured limit. 1 Health monitor 4 200 The license expiration date has been checked. 2 Core 6 201 The appliance has successfully completed all FIPS 140-2 self-tests. 2 Core 6 301 Download of update files was stopped because there is not enough disk space. 3 Updater 3 302 Download of product x failed for node y in central management. 3 Updater 3 303 The update module reports that update of product x failed on node y in central management. 3 Updater 3 304 The update module received a report from an update server that status of product x is up-to-date. 3 Updater 3 305 The update module could not connect to an update server. 3 Updater 3 501 The Log File Manager failed to push log files. 5 Log File Manager 3 601 Data packages involved in a yum update require an restart of the appliance to become effective. 6 mwg-update 4 666 A FIPS 140-2 self-test failed on node y in central management. The node is running in non-FIPS mode. 1 FIPS 0 McAfee Web Gateway 7.1.5 Product Guide 327
Page 1 and 2:
Product Guide McAfee ® version 7.1
Page 3 and 4:
Contents Preface 9 About this guide
Page 5 and 6:
Contents Standard authentication .
Page 7 and 8:
Contents Create an error handler .
Page 9 and 10:
Preface About this guide This Produ
Page 11 and 12:
Table i-2 Acronyms (continued) Acro
Page 13 and 14:
1 Introduction Contents Comprehensi
Page 15 and 16:
Deployment of the McAfee Web Gatewa
Page 17 and 18:
Operating system Introduction Filte
Page 19 and 20:
Introduction Chapters of this guide
Page 21 and 22:
2 Setup and logon Contents Setting
Page 23 and 24:
Setup and logon Setting up the McAf
Page 25 and 26:
Installing the appliance software S
Page 27 and 28:
2 Review the summary that is displa
Page 29 and 30:
Import a license Setup and logon Lo
Page 31 and 32:
Main elements of the user interface
Page 33 and 34:
Setting up system management tools
Page 35 and 36:
Setup and logon Setting up system m
Page 37 and 38:
3 Proxies and caching Contents Inte
Page 39 and 40:
Explicit proxy mode Proxies and cac
Page 41 and 42:
Table 3-1 WCCP Services list (conti
Page 43 and 44:
Proxies and caching Network modes 3
Page 45 and 46:
Transparent bridge mode Proxies and
Page 47 and 48:
Page 49 and 50:
Transparent router mode Proxies and
Page 51 and 52:
Page 53 and 54:
Common proxy settings Proxies and c
Page 55 and 56:
Proxies and caching Common proxy se
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
8 Make sure the following is config
Page 63 and 64:
Proxies and caching Reverse HTTPS p
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Proxies and caching Providing proxy
Page 73 and 74:
Preventing data leaks Proxies and c
Page 75 and 76:
Web caching Proxies and caching Web
Page 77 and 78:
Bypass lists for web caching Proxie
Page 79 and 80:
Verify the enabling of the web cach
Page 81 and 82:
4 Rules and rule sets Contents Filt
Page 83 and 84:
Rules and rule sets Filtering contr
Page 85 and 86:
Modules for delivering filtering in
Page 87 and 88:
Rules on the user interface On the
Page 89 and 90:
Property of a URL Property — URL.
Page 91 and 92:
About rule sets Rules and rule sets
Page 93 and 94:
Rules and rule sets About rule sets
Page 95 and 96:
Table 4-4 Rule set library Rule set
Page 97 and 98:
The Rule Sets toolbar provides the
Page 99 and 100:
Add name, comment, and enabling Com
Page 101 and 102:
Add as many parameters as needed. A
Page 103 and 104:
3 Select Event. The Add Event windo
Page 105 and 106:
Adding the action 9 Select Action.
Page 107 and 108:
Rules and rule sets Rule configurat
Page 109 and 110:
Add a new rule set You can also cre
Page 111 and 112:
List maintenance Rules and rule set
Page 113 and 114:
Add a list Complete the following p
Page 115 and 116:
Action and engine settings Rules an
Page 117 and 118:
Access restrictions Rules and rule
Page 119 and 120:
5 Filtering users Authentication an
Page 121 and 122:
Authentication and access managemen
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Module for authenticating users Aut
Page 129 and 130:
Page 131 and 132:
LDAP Settings specifying the LDAP m
Page 133 and 134:
Novell eDirectory Settings specifyi
Page 135 and 136:
Kerberos Settings specifying the Ke
Page 137 and 138:
Table 5-8 Certificate Authorities l
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Administrator accounts Authenticati
Page 167 and 168:
Page 169 and 170:
6 Web filtering Contents Filtering
Page 171 and 172:
Virus and malware filtering Web fil
Page 173 and 174:
Web filtering Virus and malware fil
Page 175 and 176:
Page 177 and 178:
Whitelists for virus and malware fi
Page 179 and 180:
Page 181 and 182:
Module for virus and malware filter
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
URL filtering Web filtering URL fil
Page 189 and 190:
Web filtering URL filtering 6 The B
Page 191 and 192:
Modify a filtering rule to block un
Page 193 and 194:
Web filtering URL filtering 6 Add a
Page 195 and 196:
Module for URL filtering Web filter
Page 197 and 198:
Web filtering URL filtering 6 Advan
Page 199 and 200:
Different versions of URL category
Page 201 and 202:
Web filtering Media type filtering
Page 203 and 204:
Web filtering Media type filtering
Page 205 and 206:
Lists for media type filtering Web
Page 207 and 208:
HTML filtering Web filtering HTML f
Page 209 and 210:
Web filtering HTML filtering 6 Embe
Page 211 and 212:
Break; User-Defined.removeOneScript
Page 213 and 214:
Media Type String Blocklist List of
Page 215 and 216:
Global whitelists Web filtering Glo
Page 217 and 218:
Web filtering SSL scanning 6 Handle
Page 219 and 220:
Block untrusted certificate authori
Page 221 and 222:
Web filtering SSL scanning 6 Verify
Page 223 and 224:
Modules for SSL scanning Web filter
Page 225 and 226:
Web filtering SSL scanning 6 SSL Cl
Page 227 and 228:
8 Click OK. The window closes and t
Page 229 and 230:
The rule set contains the following
Page 231 and 232:
Bandwidth throttling Web filtering
Page 233 and 234:
Next-hop proxies Web filtering Supp
Page 235 and 236:
Web filtering Supporting functions
Page 237 and 238:
User messages Web filtering User me
Page 239 and 240:
The following table describes the o
Page 241 and 242:
Table 6-25 Template Editor (continu
Page 243 and 244:
Web filtering User messages 6 Redir
Page 245 and 246:
7 System configuration Contents Con
Page 247 and 248:
System settings System configuratio
Page 249 and 250:
Table 7-4 List of sections on syste
Page 251 and 252:
License system settings System conf
Page 253 and 254:
Network Protection system settings
Page 255 and 256:
System configuration System setting
Page 257 and 258:
Database updates Table 7-13 File Ed
Page 259 and 260:
System configuration Database updat
Page 261 and 262:
Configure central management settin
Page 263 and 264:
System configuration Central manage
Page 265 and 266:
Scheduled job settings This section
Page 267 and 268:
System configuration Central manage
Page 269 and 270:
8 Monitoring Contents Monitoring th
Page 271 and 272:
Monitoring Dashboard 8 Overview of
Page 273 and 274:
Charts and Tables tab Monitoring Da
Page 275 and 276: Table 8-4 Overview of charts and ta
Page 277 and 278: Logging Monitoring Logging 8 Applia
Page 279 and 280: Sample logging rule Monitoring Logg
Page 281 and 282: 13 Configure the following for the
Page 283 and 284: Monitoring Logging 8 4 Go to Policy
Page 285 and 286: + Number.ToString (Block.ID) + “
Page 287 and 288: Create a rule for setting text as t
Page 289 and 290: Monitoring Logging 8 • In the Con
Page 291 and 292: Configuring log file settings Monit
Page 293 and 294: Monitoring Logging 8 Auto Pushing S
Page 295 and 296: Log handler rule sets Monitoring Lo
Page 297 and 298: Performance measurement Monitoring
Page 299 and 300: Monitoring Performance measurement
Page 301 and 302: Transferring data to an ePO server
Page 303 and 304: Event monitoring with SNMP Monitori
Page 305 and 306: Error handling Table 8-7 Trap Sinks
Page 307 and 308: Rule sets for error handling Monito
Page 309 and 310: The rule set contains the following
Page 311 and 312: Monitoring Error handling 8 Handle
Page 313 and 314: Monitoring Error handling 8 Block o
Page 315 and 316: 9 Troubleshooting Contents Troubles
Page 317 and 318: Enable the creation of connection t
Page 319 and 320: List of actions Appendix: Configura
Page 321 and 322: Table A-2 List of error IDs (contin
Page 323 and 324: Table A-3 List of events (continued
Page 325: Table A-3 List of events (continued
Page 329 and 330: Table A-4 List of incident IDs (con
Page 331 and 332: Table A-5 List of properties (conti
Page 367 and 368: Wildcard expressions Appendix: Conf
Page 369 and 370: Table A-6 List of important special
Page 371 and 372: Table A-7 List of important special
Page 373 and 374: Index A access restrictions 117 act
Page 375 and 376: I ICAP server, see proxies ICQ, see
Page 377 and 378:
SNMP monitoring 303 SSL scanning Ce
Page 380:
700-3299A00
show all

Web Gateway 7.1.5 Product Guide - McAfee

Create successful ePaper yourself

Delete template?

Save as template?