Web Gateway 7.1.5 Product Guide - McAfee

13 Configure the following for the log file line:
“[” + DateTime.ToString(“ ”) + “]”
+ Authentication.UserName + ““ ””
+ String.IP.ToString (Client.IP) + ““ ”
+ String.List.String.ToString (Antimalware.VirusNames) + ““ ”
+ URL + ““ ””
To do this:
Monitoring
Logging 8
a Click Add and in the window that opens select Value and enter an opening square bracket. Then
click OK.
b Click Add again, select Property, and from the properties list, select DateTime.ToString
(String).
c Click Parameters and in the Property Parameters window (where Value is selected), click OK.
Then click OK again to close the preceding window.
d Click Add, select Value and enter a closing square bracket. Then click OK.
This adds the date and time part included in square brackets and with an output field for the
date and time value.
e Click Add, select Property, and from the properties list, select Authentication.UserName.
Then click OK.
f Click Add and in the Value field, type “ ”. Then click OK.
This adds the user name part with an output field for the value.
g Use the appropriate items to add properties and output fields for the client IP address and the
remaining parameters as shown at the beginning of this step.
h Click OK to close the Add Set Property window.
14 To add the write event, click Add and select Event. The Add Event window opens.
15 From the properties list, select FileSystemLogging.WriteFileEntry.
16 Click Parameters. The Property Parameters window opens.
17 From the properties list, select User-Defined-LogLine. This adds the entry that is written into the
log file.
18 Click OK on both open windows to close them.
19 Select Summary to review what you have configured.
20 Click Finish. The sample logging rule is inserted in the Found Viruses Log rule set. Click Delete to
remove it again.
21 Click Save Changes.
McAfee Web Gateway 7.1.5 Product Guide 281