Download Pioneer AVIC U310BT Operation Manual

More documents

Recommendations

Info

Chapter 06 30 Setting a route to your destination When the route calculation is completed, “Route confirmation screen” appears. Route confirmation screen 1 2 3 4 1 Distance to the destination 2 Travel time to your destination 3 Estimate the fuel cost to your destination = For details, refer to Inputting the fuel consumption information for calculating the fuel cost on page 62. 4 Route calculation condition % Touch [OK]. Sets the displayed route as your route, and starts the route guidance. # Touch . The message confirming whether to cancel the calculated route appears. Touch [Yes] to cancel the calculated route, and then the map screen appears. Modifying the route calculation conditions You can modify the conditions for route calculation and recalculate the current route. 1 Touch [Options] on the “Route confirmation screen”. The “Route Options” screen appears. En 2 Touch the desired items to change the route calculation conditions and then touch [OK]. The route is recalculated, and “Route confirmation screen” appears. Items that users can operate Settings marked with an asterisk (*) show that these are default or factory settings. Route Condition This setting controls how the route should be calculated by taking into account the time or the distance or the main road. Determines which condition takes priority for route calculation. [Fast]*: Calculates a route with the shortest travel time to your destination as a priority. [Short]: Calculates a route with the shortest distance to your destination as a priority. [Major]: Calculate a route that passes major arterial road as a priority. Avoid Toll Road This setting controls whether toll roads (including toll areas) should be taken into account. [Off]*: Calculate a route that may include toll roads (including toll areas). [On]: Calculate a route that avoids toll roads (including toll areas). p The system may calculate a route that includes toll road even if [On] is selected. Avoid Ferry This setting controls whether ferry crossings should be taken into account. [Off]*: Calculate a route that may include ferries. [On]: Calculate a route that avoids ferries. p The system may calculate a route that includes ferry way even if [On] is selected.
Setting a route to your destination Avoid Freeway This setting controls whether freeways may be included in the route calculation. [Off]*: Calculate a route that may include freeways. [On]: Calculate a route that avoids freeways. p The system may calculate a route that includes freeway even if [On] is selected. Time restrictions This setting controls whether streets or bridges have traffic restrictions during a certain time should be taken into account. p If you want to set your route to avoid opened bridges, select [On]. [On]*: Calculate a route while avoiding streets or bridges with traffic restrictions during a certain time. [Off]: Calculate a route while ignoring traffic restrictions. p The system may calculate a route that includes streets or bridges that are subject to traffic restrictions during a certain time even if [On] is selected. CAUTION If the time difference is not set correctly, the navigation system cannot consider traffic regulations correctly. Set the time difference correctly (= Refer to Setting the time difference on page 60). Checking the current itinerary You can check the route details. % Touch [Profile] on the “Route confirmation screen”. The “Route Profile” screen appears. p When a long distance route is calculated, your navigation system may not be able to list all roads. (In this case, the remaining roads will be shown in the list as you drive on.) Adding a waypoint Up to 5 waypoints can be set, and waypoints and final destination can be sorted automatically or manually. p When you set waypoints in the route to your destination, the route up to the next waypoint will appear in light green. The rest of the route will appear in light blue. = For details concerning operations, refer to Adding a waypoint on page 33. 1 Touch [Waypoints] on the “Route confirmation screen”. The “Waypoints List” screen appears. 2 Touch [Add]. The “Select Search method” screen appears. En Chapter 06 31 Setting a route to your destination
Page 1 and 2: Operation Manual FLASH MEMORY NAVIG
Page 3 and 4: Contents - Setting “Close Up View
Page 5 and 6: Contents Storing and recalling broa
Page 7 and 8: Introduction Manual overview Before
Page 9 and 10: Introduction % Press the RESET butt
Page 11 and 12: Before you start 7 SRC/OFF button T
Page 13 and 14: Before you start Plugging in a USB
Page 15 and 16: How to use the detachable device Re
Page 17 and 18: How to use the detachable device 4
Page 19 and 20: How to use the detachable device En
Page 21 and 22: Operating menu screens (e.g. “Nav
Page 23 and 24: How to use the map The direction to
Page 25 and 26: How to use the map p If you do not
Page 27 and 28: How to use the map 6 Touch the subc
Page 29: Setting a route to your destination
Page 33 and 34: Checking and modifying the current
Page 35 and 36: Checking and modifying the current
Page 37 and 38: Searching for and selecting a locat
Page 43 and 44: Registering and editing locations S
Page 45 and 46: Registering and editing locations #
Page 47 and 48: Using hands-free phoning Searching
Page 49 and 50: Using hands-free phoning p If regis
Page 51 and 52: Using hands-free phoning Alphabet t
Page 53 and 54: Using hands-free phoning Dialing a
Page 55 and 56: Using hands-free phoning 5 When the
Page 57 and 58: Using hands-free phoning 1 Touch [S
Page 59 and 60: Modifying the general settings for
Page 65 and 66: Other functions Exporting data for
Page 67 and 68: Other functions 1 Insert an SD memo
Page 69 and 70: Basic flow of operation Using the a
Page 71 and 72: Basic flow of operation What you ca
Page 73 and 74: Using the radio (FM) Storing the st
Page 75 and 76: Using the radio (AM) Storing the st
Page 77 and 78: Using the HD Radio (Digital Radio)
Page 79 and 80: Playing audio CDs You can play a no
Page 81 and 82:
Playing audio CDs p If you touch du
Page 83 and 84:
Playing music files on ROM 6 Advanc
Page 85 and 86:
Playing music files on ROM % Touch
Page 87 and 88:
Playing music files on USB Pressing
Page 89 and 90:
Using an iPod Using the USB interfa
Page 91 and 92:
Using an iPod 2 Turn MULTI-CONTROL
Page 93 and 94:
Using an iPod 1 Press LIST button t
Page 95 and 96:
Using the XM tuner Operating by har
Page 97 and 98:
Using the SIRIUS tuner = For detail
Page 99 and 100:
Using the SIRIUS tuner 6 Press the
Page 101 and 102:
Using the external unit (EXT1, EXT2
Page 103 and 104:
Turning the source off % Press SRC/
Page 105 and 106:
Customizing the initial settings 1
Page 107 and 108:
Audio adjustments Vocal Vocal is a
Page 109 and 110:
Audio adjustments Adjusting source
Page 111 and 112:
Returning the Navigation System to
Page 113 and 114:
Appendix Troubleshooting If you hav
Page 115 and 116:
Appendix Cannot be operated. Proble
Page 117 and 118:
Appendix Messages for audio functio
Page 119 and 120:
Appendix Positioning technology Pos
Page 121 and 122:
Appendix ! If the road has a series
Page 123 and 124:
Appendix Built-in drive and care !
Page 125 and 126:
Appendix SD memory card and SDHC me
Page 127 and 128:
Appendix WAV compatibility Media CD
Page 129 and 130:
Appendix Detailed information regar
Page 131 and 132:
Appendix Display information “Nav
Page 133 and 134:
Appendix Glossary AAC AAC is short
Page 135 and 136:
Appendix Specifications General Rat
Page 137:
PIONEER CORPORATION 4-1, MEGURO 1-C
show all

Download Pioneer AVIC U310BT Operation Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?