Download Pioneer AVIC U310BT Operation Manual
Download Pioneer AVIC U310BT Operation Manual
Download Pioneer AVIC U310BT Operation Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Using the HD Radio (Digital Radio)<br />
Pressing and holding MULTI-CONTROL<br />
left or right<br />
The tuner will scan the frequencies until a<br />
broadcast strong enough for good reception is<br />
found.<br />
p You can cancel seek tuning by pressing<br />
MULTI-CONTROL left or right.<br />
Pressing the center of MULTI-CONTROL<br />
The function select screen appears.<br />
Storing and recalling<br />
broadcast frequencies<br />
With a touch of any of the preset tuning keys<br />
( to ), you can easily store up to six broadcast<br />
frequencies for later recall (also with the<br />
touch of a key).<br />
1 When you find a frequency that you<br />
want to store in memory, keep touching a<br />
preset tuning key to until the preset<br />
number (e.g., P.CH1) stops flashing.<br />
The selected radio station has been stored in<br />
memory.<br />
2 Touch the same preset tuning key to<br />
.<br />
The radio station frequencies are recalled from<br />
memory.<br />
Storing the strongest<br />
broadcast frequencies<br />
“BSM” (best stations memory) lets you automatically<br />
store the six strongest broadcast frequencies<br />
under the preset tuning keys to<br />
and, once stored there, you can tune in to<br />
these frequencies with the touch of a key.<br />
1 Display the “Function Menu” screen.<br />
= For details, refer to Screen switching overview<br />
on page 70.<br />
2 Turn MULTI-CONTROL to display<br />
“BSM”.<br />
3 Press the center of MULTI-CONTROL to<br />
start “BSM”.<br />
BSM begins to flash. While BSM is flashing,<br />
the six strongest broadcast frequencies will be<br />
stored under the preset tuning keys to in<br />
order of their signal strength. When this is<br />
complete, BSM stops flashing.<br />
p To cancel the storage process, press the<br />
center of MULTI-CONTROL again.<br />
p Storing broadcast frequencies with BSM<br />
may replace broadcast frequencies you<br />
have already saved by using to .<br />
Tuning in strong signals<br />
Local seek tuning allows you to tune in only<br />
those radio stations with sufficiently strong<br />
signals for good reception.<br />
1 Display the “Function Menu” screen.<br />
= For details, refer to Screen switching overview<br />
on page 70.<br />
2 Turn MULTI-CONTROL to display<br />
“Local”.<br />
3 Pressing the center of MULTI-CONTROL<br />
switches between on and off.<br />
4 Press MULTI-CONTROL left or right to<br />
set the sensitivity.<br />
There are four levels of sensitivity for FM and<br />
two levels for AM:<br />
FM: Level1 — Level2 — Level3 — Level4<br />
AM: Level1 — Level2<br />
p The FM “4” (AM “2”) setting allows reception<br />
of only the strongest stations, while<br />
lower settings let you receive weaker<br />
stations.<br />
Switching the seek mode<br />
You can select the method of seek tuning.<br />
1 Display the “Function Menu” screen.<br />
= For details, refer to Screen switching overview<br />
on page 70.<br />
En<br />
Chapter<br />
16<br />
77<br />
Using the HD Radio (Digital Radio)