Download Pioneer AVIC U310BT Operation Manual

Checking and modifying the current route
You can check the route details. You can also
recalculate the route in different conditions.
1 Display the “Navigation Menu” screen.
2 Touch [Route info].
“Route confirmation screen” appears.
p [Route info] is active only when the route
is set.
Checking the current itinerary
You can check the route details.
1 Display the “Route confirmation
screen”.
2 Touch [Profile] on the “Route confirmation
screen”.
The “Route Profile” screen appears.
p When a long distance route is calculated,
your navigation system may not be able to
list all roads. (In this case, the remaining
roads will be shown in the list as you drive
on.)
Editing waypoints
You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that is passes through
these locations.
To edit the waypoints, display the “Waypoints
List” screen.
1 Display the “Route confirmation
screen”.
2 Touch [Waypoints] on the “Route confirmation
screen”.
The “Waypoints List” screen appears.
Adding a waypoint
Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automatically
or manually.
1 Display the “Waypoints List” screen.
2 Touch [Add].
The “Select Search method” screen appears.
3 Search for a location.
After searching for a point, display it on a
map, then touch [OK] to add to the “Waypoints
List” screen.
En
Chapter
07
33
Checking and modifying the current route