Hybrid Restorations with the CAMLOG Implant System (PDF
Hybrid Restorations with the CAMLOG Implant System (PDF
Hybrid Restorations with the CAMLOG Implant System (PDF
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
IMPRESSION TAKING OVER THE <strong>CAMLOG</strong> ®<br />
IMPLANT SHOULDER<br />
INSERTING THE <strong>CAMLOG</strong> ® BAR ABUTMENTS INTO<br />
THE WORKING CAST<br />
The dental technician selects <strong>the</strong> appropriate <strong>CAMLOG</strong> ® bar abutments<br />
according to <strong>the</strong> <strong>CAMLOG</strong> ® implant diameter used (note color-coding) and<br />
<strong>the</strong> specific gingival heights and inserts <strong>the</strong>m into <strong>the</strong> <strong>CAMLOG</strong> ® lab<br />
analogs.<br />
The <strong>CAMLOG</strong> ® bar abutments are inserted into <strong>the</strong> driver for bar abutments.<br />
A driver is available for each implant diameter 3.3/3.8/4.3 mm and 5.0/<br />
6.0 mm. A screw integrated in <strong>the</strong> instrument secures <strong>the</strong> abutment. The<br />
screw is tightened by hand.<br />
The driver is used to tighten <strong>the</strong> <strong>CAMLOG</strong> ® bar abutments by hand. The<br />
bar abutment plateau should be approx. 0.5 mm supragingival.<br />
IMPORTANT NOTE<br />
The bar abutments must not be modified!<br />
The bar is fabricated on <strong>the</strong> cast. A previously prepared silicone index is<br />
used to virtually represent <strong>the</strong> space available in <strong>the</strong> planning and fabrication<br />
of <strong>the</strong> bar construction.<br />
Driver for bar abutment<br />
Ø 3.3/3.8/4.3 mm<br />
Ø 5.0/6.0 mm<br />
Finished working cast <strong>with</strong><br />
<strong>CAMLOG</strong> ® bar abutments<br />
HYBRID RESTORATIONS WITH THE <strong>CAMLOG</strong> ® IMPLANT SYSTEM<br />
Working cast <strong>with</strong> silicone<br />
index<br />
0.5 mm<br />
27
Change language