Hybrid Restorations with the CAMLOG Implant System (PDF

More documents

Recommendations

Info

HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM BAR RESTORATIONS INSERTING THE BAR CONSTRUCTION The CAMLOG ® bar abutments are transferred from the working cast to the CAMLOG ® implants and screwed in definitely with the prescribed torque. The finished bar construction is transferred to the CAMLOG ® bar abutments and fixed definitely with 15 Ncm with new unused prosthetic screws, using a screwdriver (hex). The newly created full denture is then inserted and checked for proper fit. SLEEVE FOR TITANIUM BONDING BASE, BURN- OUT (PASSIVE FIT) Cast bar version with prefabricated bar sleeve made of burn-out plastic (POM) for full casting technique and titanium bonding base as a retaining element for the implant. The Passive Fit System makes it possible to fabricate cast bars absolutely tension-free. For bar fabrication, the bar sleeve is placed over the titanium bonding base. After completing the bar, it is bonded to the implants with the titanium bonding bases. The plastic sleeve of the bar base can be shortened occlusally to the height of the prosthetic screw. The overall height of the plastic sleeve is 14 mm. EXAMPLE: WORKING CAST WITH CAMLOG ® LAB ANALOGS (TITANIUM ALLOY). WAX-UP The bar wax-up is created based on the planning on the burn-out bar base directly. The wax thickness over the plastic coping should be at least 0.3 mm. Do not cover the delicate edge of the base with wax. Prefabricated bar components made of wax / plastic can also be used to fabricate a premilled bar construction. Embedding, casting and devestment happen as described on page 28–29 "BASE FOR BAR ABUTMENT, BURN-OUT". 30 Sleeve for titanium bonding base, burn-out, bondable (passive fit)
TRIMMING After devestment and cleaning of the cast, the internal fixation edges (screw seat) are removed from the bar sleeves with a round bur (Ø 2.4 mm). The prosthetic screw must slide lightly through the bar sleeve. The final screw seat is on the titanium bonding base. Cast bar construction Removing the screw seat Checking the screw mobility Fit of the bonding base After trimming, prosthetic screws are used to attach the titanium bonding bases on the cast. The bar is placed on the titanium bonding bases and the fit checked. If the bar is seated tension-free on the cast at the try-in, it can then be bonded to the titanium bonding bases. BONDING THE CAST BAR TO THE TITANIUM BONDING BASES After completing the bar framework, the CAMLOG ® bar abutments are transferred from the cast to the implants and screwed in by hand. The titanium bonding bases are placed on the CAMLOG ® bar abutments and with the prosthetic screw, screwed on by hand. HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM Insertion of CAMLOG ® bar abutments Placing the titanium bonding bases 31
Page 1 and 2: HYBRID RESTORATIONS WITH THE CAMLOG
Page 3 and 4: LOCATOR ® ANCHORING SYSTEM PRODUCT
Page 5 and 6: SYSTEM INTRODUCTION GENERAL GUIDELI
Page 9 and 10: CAMLOG COLOR-CODING HYBRID RESTORAT
Page 11 and 12: ANCHORING OPTIONS In consideration
Page 13 and 14: CAMLOG ® CAST FABRICATION CAST FAB
Page 15 and 16: CAST FABRICATION, OPEN TRAY PREPARA
Page 17 and 18: CAMLOG ® BITE REGISTRATION POSTS I
Page 19 and 20: Remove the bite register, the bite
Page 21 and 22: BAR RESTORATIONS INTRODUCTION In im
Page 23 and 24: CAMLOG ® IMPRESSION TAKING OPTIONS
Page 25 and 26: The impression posts are then reatt
Page 27 and 28: IMPRESSION TAKING OVER THE CAMLOG
Page 29: INVESTMENT, CAST AND DEVESTMENT The
Page 33 and 34: After wax-up of the bar framework,
Page 35 and 36: INSERTING THE BAR CONSTRUCTION The
Page 37 and 38: RELINING OF A BAR-SUPPORTED FULL DE
Page 39 and 40: BALL ABUTMENT ANCHORING SYSTEM INTR
Page 41 and 42: CAMLOG ® BALL ABUTMENT FOR IMPLANT
Page 43 and 44: FABRICATION OF A NEW BALL ABUTMENT-
Page 45 and 46: BONDING THE MATRICES IN THE METAL R
Page 47 and 48: BROADENING OF AN EXISTING FULL DENT
Page 49 and 50: A cold-cured polymer is used to att
Page 51 and 52: RELINING NOTE Before relining, the
Page 55 and 56: PROCESSING INSERTION OF THE CAMLOG
Page 57 and 58: CAST FABRICATION After taking the i
Page 59 and 60: CONVERTING AN EXISTING FULL DENTURE
Page 61 and 62: The titanium housing is polymerized
Page 63 and 64: DOUBLE CROWN RESTORATIONS INTRODUCT
Page 65 and 66: CAMLOG ® UNIVERSAL ABUTMENT AND CA
Page 67 and 68: FABRICATING A TERTIARY FRAMEWORK FO
Page 69 and 70: CAMLOG ® GOLD-PLASTIC ABUTMENT The
Page 71 and 72: The investment material must be mat
Page 73 and 74: ACCESSORIES AND PROSTHETIC INSTRUME
Page 75 and 76: FURTHER DOCUMENTATION Further infor

Hybrid Restorations with the CAMLOG Implant System (PDF

Create successful ePaper yourself

Delete template?

Save as template?