Hybrid Restorations with the CAMLOG Implant System (PDF

More documents

Recommendations

Info

HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM LOCATOR ® ANCHORING SYSTEM FABRICATION OF A NEW LOCATOR ® -RETAINED FULL DENTURE IMPRESSION TAKING The impression is taken over the CAMLOG ® Locator ® abutments definitely integrated in the CAMLOG ® implants using the Locator ® impression cap. An impression cap is positioned on each CAMLOG ® Locator ® abutment. Pay attention to the proper seating of the impression cap. An impression of the oral situation is then taken using suitable impression materials such as silicone or polyether materials. After the impression material has cured and the tray has been removed, the Locator ® impression caps remain in the material. SELECTING THE REPLACEMENT MALES The determined values are used to select the suitable Locator ® replacement males: Locator ® male processing packages incl. titanium housing with black processing replacement male, block out spacer white and replacement males (clear, pink, blue) REPLACEMENT MALES FOR IMPLANT AXIS DIVERGENCES OF 0°–10° PER IMPLANT Color: clear Retention force: STRONG Color: pink Retention force: MEDIUM Color: blue Retention force: LIGHT The insertion of the Locator ® replacement males (are delivered in each male processing package) can be carried out in the dental lab or in the dental practice, according to the chosen integration method. 56 Locator ® male processing packages for extended range incl. titanium housing with black processing replacement male, block out spacer white and replacement males for extended range (green, orange, red) Locator ® impression cap REPLACEMENT MALES FOR IMPLANT AXIS DIVERGENCES OF 10°–20° PER IMPLANT, EXTENDED RANGE (NONLICENSED FOR IMPLANT Ø 3.3 MM) Color: green Retention force: STRONG Color: orange Retention force: MEDIUM Color: red Retention force: LIGHT
CAST FABRICATION After taking the impression, the cast is fabricated using Locator ® analogs, which are available in two sizes. The analogs are selected based on the CAMLOG ® Locator ® abutments used. NOTE The CAMLOG ® Locator ® abutment diameters used are not apparent in the impression and must be communicated to the laboratory to select the Locator ® analogs. SELECTING THE LOCATOR ® ANALOG Locator ® impression cap Art. No. J2253.0340 für Locator Ø 3.3/3.8/4.3 mm ® Locator abutments ® analog Art. No. J2253.0350 Ø 5.0 mm The Locator ® analogs designed for the corresponding implant diameters are placed in the Locator ® impression caps in the impression. Pay attention to the proper seating of the analogs. The cast is then fabricated with suitable model material. HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM FABRICATING THE FULL DENTURE After fabricating the cast, the white block out spacers included in the Locator ® male processing packages are pulled over the functional areas of the Locator ® analogs to prevent acrylic from getting into the titanium housings. White block out spacer The titanium housing with the black processing replacement male is placed on each analog over the previously placed block out spacer until the pressure point is reached. The titanium housing is attached by the black processing replacement male and the resilience of the denture determined. Black processing replacement male CAUTION Undercuts between the titanium housings and the surrounding tissue not covered by the block out spacers must be blocked out. Acrylic must not get into the titanium housing during fabrication! The full denture can now be fabricated in the conventional technology. 57
Page 1 and 2:
HYBRID RESTORATIONS WITH THE CAMLOG
Page 3 and 4:
LOCATOR ® ANCHORING SYSTEM PRODUCT
Page 5 and 6: SYSTEM INTRODUCTION GENERAL GUIDELI
Page 7 and 8: HYBRID RESTORATIONS WITH THE CAMLOG
Page 9 and 10: CAMLOG COLOR-CODING HYBRID RESTORAT
Page 11 and 12: ANCHORING OPTIONS In consideration
Page 13 and 14: CAMLOG ® CAST FABRICATION CAST FAB
Page 15 and 16: CAST FABRICATION, OPEN TRAY PREPARA
Page 17 and 18: CAMLOG ® BITE REGISTRATION POSTS I
Page 19 and 20: Remove the bite register, the bite
Page 21 and 22: BAR RESTORATIONS INTRODUCTION In im
Page 23 and 24: CAMLOG ® IMPRESSION TAKING OPTIONS
Page 25 and 26: The impression posts are then reatt
Page 27 and 28: IMPRESSION TAKING OVER THE CAMLOG
Page 29 and 30: INVESTMENT, CAST AND DEVESTMENT The
Page 31 and 32: TRIMMING After devestment and clean
Page 33 and 34: After wax-up of the bar framework,
Page 35 and 36: INSERTING THE BAR CONSTRUCTION The
Page 37 and 38: RELINING OF A BAR-SUPPORTED FULL DE
Page 39 and 40: BALL ABUTMENT ANCHORING SYSTEM INTR
Page 41 and 42: CAMLOG ® BALL ABUTMENT FOR IMPLANT
Page 43 and 44: FABRICATION OF A NEW BALL ABUTMENT-
Page 45 and 46: BONDING THE MATRICES IN THE METAL R
Page 47 and 48: BROADENING OF AN EXISTING FULL DENT
Page 49 and 50: A cold-cured polymer is used to att
Page 51 and 52: RELINING NOTE Before relining, the
Page 53 and 54: HYBRID RESTORATIONS WITH THE CAMLOG
Page 55: PROCESSING INSERTION OF THE CAMLOG
Page 59 and 60: CONVERTING AN EXISTING FULL DENTURE
Page 61 and 62: The titanium housing is polymerized
Page 63 and 64: DOUBLE CROWN RESTORATIONS INTRODUCT
Page 65 and 66: CAMLOG ® UNIVERSAL ABUTMENT AND CA
Page 67 and 68: FABRICATING A TERTIARY FRAMEWORK FO
Page 69 and 70: CAMLOG ® GOLD-PLASTIC ABUTMENT The
Page 71 and 72: The investment material must be mat
Page 73 and 74: ACCESSORIES AND PROSTHETIC INSTRUME
Page 75 and 76: FURTHER DOCUMENTATION Further infor
show all

Hybrid Restorations with the CAMLOG Implant System (PDF

Create successful ePaper yourself

Delete template?

Save as template?