Hybrid Restorations with the CAMLOG Implant System (PDF

More documents

Recommendations

Info

HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM SYSTEM INTRODUCTION CAMLOG ® IMPLANT ABUTMENT CONNECTION Various CAMLOG ® abutments for anchoring of an implant-retained full denture with varying geometries are available for the CAMLOG ® Implant System. The abutments differ in the apical area with two different types of connection. CAMLOG ® BAR, BALL AND LOCATOR ® ABUTMENTS CAMLOG ® bar, ball and Locator ® abutments have a thread in the apical area that engages the upper respectively lower (for implants with Ø 3.3 mm) inner thread of the CAMLOG ® lab analog respectively CAMLOG ® implant. The abutments are screwed into the CAMLOG ® implant with a defined torque using the corresponding drivers and close flush with the implant shoulder. CAMLOG ® Bar Abutment Due to the design of the screw connection, the abutments do not have cams. Example: CAMLOG ® ball abutment (Ø 4.3 mm) in a CAMLOG ® SCREW-LINE implant 6 CAMLOG ® Ball Abutment CAMLOG ® Locator ® Abutment Screw-retained CAMLOG ® abutment Upper inner thread Lower inner thread CAMLOG ® implant
HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM CAMLOG ® UNIVERSAL, TELESCOPE AND GOLD-PLASTIC ABUTMENTS CAMLOG ® universal, telescope and gold-plastic abutments can be used to fabricate double crown anchoring. They have the CAMLOG ® Tube-in- Tube implant abutment connection in the apical area and feature three symmetrically arranged cams. When inserting the CAMLOG ® abutments, their tubular extension toward the apex affects the simple, easy and safe orientation in the longitudinal axis of the CAMLOG ® implant/CAMLOG ® lab analog before the three cams rest on the shoulder of the implant. The abutment is rotated until tactile engagement of the cams in the grooves of the implant/lab analog. The abutment is then in the final position. A screwdriver (hex) is used to fix the CAMLOG ® abutment screw devinitely with a defined torque. CAMLOG ® Universal Abutment CAMLOG ® Universal Abutment PS Abutment guide in the CAMLOG ® implant CAMLOG ® Telescope Abutment Inserted CAMLOG ® abutment Groove/cam design Example: CAMLOG ® universal abutment (Ø 4.3 mm) in a SCREW-LINE implant CAMLOG ® Gold-plastic Abutment CAMLOG ® abutment screw CAMLOG ® implant 7
Page 1 and 2: HYBRID RESTORATIONS WITH THE CAMLOG
Page 3 and 4: LOCATOR ® ANCHORING SYSTEM PRODUCT
Page 5: SYSTEM INTRODUCTION GENERAL GUIDELI
Page 9 and 10: CAMLOG COLOR-CODING HYBRID RESTORAT
Page 11 and 12: ANCHORING OPTIONS In consideration
Page 13 and 14: CAMLOG ® CAST FABRICATION CAST FAB
Page 15 and 16: CAST FABRICATION, OPEN TRAY PREPARA
Page 17 and 18: CAMLOG ® BITE REGISTRATION POSTS I
Page 19 and 20: Remove the bite register, the bite
Page 21 and 22: BAR RESTORATIONS INTRODUCTION In im
Page 23 and 24: CAMLOG ® IMPRESSION TAKING OPTIONS
Page 25 and 26: The impression posts are then reatt
Page 27 and 28: IMPRESSION TAKING OVER THE CAMLOG
Page 29 and 30: INVESTMENT, CAST AND DEVESTMENT The
Page 31 and 32: TRIMMING After devestment and clean
Page 33 and 34: After wax-up of the bar framework,
Page 35 and 36: INSERTING THE BAR CONSTRUCTION The
Page 37 and 38: RELINING OF A BAR-SUPPORTED FULL DE
Page 39 and 40: BALL ABUTMENT ANCHORING SYSTEM INTR
Page 41 and 42: CAMLOG ® BALL ABUTMENT FOR IMPLANT
Page 43 and 44: FABRICATION OF A NEW BALL ABUTMENT-
Page 45 and 46: BONDING THE MATRICES IN THE METAL R
Page 47 and 48: BROADENING OF AN EXISTING FULL DENT
Page 49 and 50: A cold-cured polymer is used to att
Page 51 and 52: RELINING NOTE Before relining, the
Page 53 and 54: HYBRID RESTORATIONS WITH THE CAMLOG
Page 55 and 56: PROCESSING INSERTION OF THE CAMLOG
Page 57 and 58:
CAST FABRICATION After taking the i
Page 59 and 60:
CONVERTING AN EXISTING FULL DENTURE
Page 61 and 62:
The titanium housing is polymerized
Page 63 and 64:
DOUBLE CROWN RESTORATIONS INTRODUCT
Page 65 and 66:
CAMLOG ® UNIVERSAL ABUTMENT AND CA
Page 67 and 68:
FABRICATING A TERTIARY FRAMEWORK FO
Page 69 and 70:
CAMLOG ® GOLD-PLASTIC ABUTMENT The
Page 71 and 72:
The investment material must be mat
Page 73 and 74:
ACCESSORIES AND PROSTHETIC INSTRUME
Page 75 and 76:
FURTHER DOCUMENTATION Further infor
show all

Hybrid Restorations with the CAMLOG Implant System (PDF

Create successful ePaper yourself

Delete template?

Save as template?