Download - Freiwald Software

!
The throttle level is set to 0, the throttle bar of the display disappears and the brake bar,
that shows the current level of the brake is displayed. This is shown in the following diagrams:
Diagram 4: Display when applying the brake
While the brake is being applied and as well as and increase
or decrease, respectively, the braking level. The brake can be released by decreasing
the braking level to zero or by pressing and releasing B once more. After releasing
the brake the display of the handheld returns to normal train mode.
A decelerated stop of the train, i.e. stopping the train subject to momentum and
tonnage specified in TrainController, can be triggered by pressing and releasing
B twice. Pressing and releasing B the first time shortly applies the brake and sets the
throttle level to 0. Pressing and releasing B the second time releases the brake while
leaving the throttle level at 0. This causes a smooth, decelerated stop of the train.
17