Download - Freiwald Software

More documents

Recommendations

Info

! 4 Managing +SmartHand There is a wide range of options, with which the use of +SmartHand can be customized to personal needs. These options are accessed through the +SmartHand Manager window of TrainController. This window shows a list of all handhelds as displayed below: Diagram 16: Handheld List The handhelds are identified by a number between 01 and 31. In case of +SmartHand Classic this number corresponds to the digital address of the handheld. This number does not also serve to address the handheld (Classic case) but also to identify a handheld or an individual set of handheld settings, respectively, uniquely in the system. In this way it is possible to define different handheld profiles for different purposes by specifying different settings for the particular handheld numbers, which can be even used by the same handheld device at different times. Connected handhelds are highlighted and show the symbol and name of the currently controlled object. The operator at the computer can change the controlled train of each handheld at any time by dragging the symbol of a train from another location of the screen to the entry in the handheld list, that corresponds to the particular handheld. This selection overwrites any selection of objects done on the handheld itself. Each handheld, that you want to communicate with TrainController must be enabled with the check mark left of its number. By removing the check mark the affected handheld can also be temporarily locked. This can be useful if the current handheld operator is misusing his privileges, or if a 37
! handheld is currently not in use and communication bandwidth should be reduced on the network. All settings specified in this dialog can be applied to all handhelds or only to particular handhelds, if desired. In the latter case the regarding handhelds must be selected by clicking to the particular entries. To select more than one handheld simultaneously, hold the CTRL key of your keyboard pressed, while clicking to the handheld entries. Selected handheld entries are highlighted (often with blue color). The +SmartHand Manager window furthermore provides several tabs with several sets of options each. These options are explained in the following: 38 4.1 Connection The following options allow to specify the connection settings. The settings can only be applied to all handhelds at the same time. After changing an option do not forget to use the option [Apply to all], otherwise the changes may not have an immediate effect.
Page 1 and 2: RAILROAD & CO. ® +SmartHand Versi
Page 3 and 4: Contact: Freiwald Software Kreuzber
Page 5 and 6: 4 3.1 Control of Locomotives and Tr
Page 7 and 8: 6 1 Introduction 1.1 Overview Train
Page 9 and 10: man operator as engineer, in both c
Page 11 and 12: • Mobile devices with a functioni
Page 13 and 14: The controls and indicators of +Sma
Page 15 and 16: 14 General Key Assignment If not ex
Page 17 and 18: The direction and scale speed displ
Page 19 and 20: 18 2.2 Emergency Stop Pressing [Alt
Page 21 and 22: 20 Diagram 8: Object Operation Head
Page 23 and 24: 22 Turnout Operation / Switchboard
Page 25 and 26: 24 2.4 Blocks / AutoTrain With +Sma
Page 27 and 28: In Keyboard mode the 16 grey and bl
Page 29 and 30: selecting “Double Slip 2” for s
Page 31 and 32: 30 3 Using +SmartHand Mobile Handhe
Page 33 and 34: • With additional optional button
Page 35 and 36: 34 3.2 Operation of Turnouts and Si
Page 37: 36 Operation of Turntables After ta
Page 41 and 42: This field shows the address, which
Page 43 and 44: Toggle Train Direction with Arrow K
Page 45 and 46: this way it is possible to define a
Page 47 and 48: This transfer must be repeated late
Page 49 and 50: Germany is selected, for example, t
Page 51 and 52: tation, then the train view is auto
Page 53 and 54: 52 Diagram 22: Privileges tab May a
Page 55 and 56: 54 Diagram 23: Favourites tab By se
Page 57 and 58: 56 Diagram 25: Message Display By p
Page 59 and 60: Handheld Computer Keyboard Computer
Page 61 and 62: ! It is also important that the req
Page 63 and 64: to the collection. New files have t
Page 65 and 66: ! view after selecting a train in a
Page 67: AutoTrain 24, 35 Baud Rate 39 Block

Download - Freiwald Software

Create successful ePaper yourself

Delete template?

Save as template?