Download - Freiwald Software

More documents

Recommendations

Info

6 Installation, Operation and Licensing 6.1 Installation For the operation of +SmartHand the following components are required: • The +SmartHand computer software. This software can be downloaded free of charge from www.freiwald.com. It contains among others the required +SmartHand Manager and must be installed in the same directory as TrainController. as well as • The +SmartHand Classic computer interface and at least one +SmartHand Classic handheld. Both devices are available in a starter set from www.freiwald.com. The computer interface is supplied with appropriate USB drivers, which are installed according to the instructions shipped with these devices. The wiring of the devices is done according to these instructions, too. or • At least one mobile device (smartphone, tablet computer, PDA, Netbook, notebook, etc.), which is suited for use as +SmartHand Mobile handheld (WLAN, touch screen for handsets, WLAN / LAN, etc. for Netbooks). Usually it is not necessary to install specific software on the device. Normally, no special instructions apply. 6.2 Operation +SmartHand handhelds usually connect automatically with TrainController, if TrainController was launched with a correctly installed +SmartHand Manager. +SmartHand Classic handhelds need to be plugged in accordingly; +SmartHand Mobile handhelds need a functioning network connection to the computer running TrainController. To connect a mobile device, start the Web browser on this device and enter the address displayed in the Connection tab of the +SmartHand Manager (see Diagram 17). 59
! It is also important that the required handheld numbers are activated in the handheld list of the +SmartHand Manager (see Diagram 16). 60 Advanced Settings for the +SmartHand Mobile Web Server The advanced settings for the +SmartHand Mobile Web server are opened by pressing the Advanced option in the Connection tab of the +SmartHand Manager. The program opens the dialog shown below. User: Diagram 26: +SmartHand Mobile Advanced Settings
Page 1 and 2:
RAILROAD & CO. ® +SmartHand Versi
Page 3 and 4:
Contact: Freiwald Software Kreuzber
Page 5 and 6:
4 3.1 Control of Locomotives and Tr
Page 7 and 8:
6 1 Introduction 1.1 Overview Train
Page 9 and 10: man operator as engineer, in both c
Page 11 and 12: • Mobile devices with a functioni
Page 13 and 14: The controls and indicators of +Sma
Page 15 and 16: 14 General Key Assignment If not ex
Page 17 and 18: The direction and scale speed displ
Page 19 and 20: 18 2.2 Emergency Stop Pressing [Alt
Page 21 and 22: 20 Diagram 8: Object Operation Head
Page 23 and 24: 22 Turnout Operation / Switchboard
Page 25 and 26: 24 2.4 Blocks / AutoTrain With +Sma
Page 27 and 28: In Keyboard mode the 16 grey and bl
Page 29 and 30: selecting “Double Slip 2” for s
Page 31 and 32: 30 3 Using +SmartHand Mobile Handhe
Page 33 and 34: • With additional optional button
Page 35 and 36: 34 3.2 Operation of Turnouts and Si
Page 37 and 38: 36 Operation of Turntables After ta
Page 39 and 40: ! handheld is currently not in use
Page 41 and 42: This field shows the address, which
Page 43 and 44: Toggle Train Direction with Arrow K
Page 45 and 46: this way it is possible to define a
Page 47 and 48: This transfer must be repeated late
Page 49 and 50: Germany is selected, for example, t
Page 51 and 52: tation, then the train view is auto
Page 53 and 54: 52 Diagram 22: Privileges tab May a
Page 55 and 56: 54 Diagram 23: Favourites tab By se
Page 57 and 58: 56 Diagram 25: Message Display By p
Page 59: Handheld Computer Keyboard Computer
Page 63 and 64: to the collection. New files have t
Page 65 and 66: ! view after selecting a train in a
Page 67: AutoTrain 24, 35 Baud Rate 39 Block
show all

Download - Freiwald Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?