Download - Freiwald Software

More documents

Recommendations

Info

Diagram 17: Connection tab Options for +SmartHand Classic Select Port: Select the USB or serial port of your computer, to which the handheld system is connected. The entry Offline activates the virtual handheld demo (see chapter 5). Select Baud Rate: Select the desired baud rate. Change this value only in case of connection problems. Use the default value 57600, if possible. Options for +SmartHand Mobile Start Web Server: Starts the built-in Web server. This option must be turned on in order to use mobile devices using their Web browser as +SmartHand Mobile handhelds. URL: 39
This field shows the address, which must be entered into the address bar of the Web browser of the mobile device to connect to the Web server. The address bar looks as follows: http:// [: ] where is the name or IP address of that computer on which the +SmartHand Mobile Web Server is running and the optional a value, which can be set via the advanced settings for experts. If more than one network adapter is installed on your computer, then it may be, that the value displayed as is not appropriate. This is the case when mobile devices connect over another network adapter than the one that was used to determine this value. In this case, the display of must be ignored. Instead the name or address of the computer in that network must be determined by other means, through which the mobile devices connect to the computer. Advanced: This option allows advanced users to make additional settings for the Web server. These settings are described in Section 6.2, “Operation“ below. For normal operation of +SmartHand Mobile these advanced settings are not necessarily required. 40 4.2 Customizing +SmartHand Classic Handhelds The following options allow to customize the handling of each Classic handheld to personal preferences:
Page 1 and 2: RAILROAD & CO. ® +SmartHand Versi
Page 3 and 4: Contact: Freiwald Software Kreuzber
Page 5 and 6: 4 3.1 Control of Locomotives and Tr
Page 7 and 8: 6 1 Introduction 1.1 Overview Train
Page 9 and 10: man operator as engineer, in both c
Page 11 and 12: • Mobile devices with a functioni
Page 13 and 14: The controls and indicators of +Sma
Page 15 and 16: 14 General Key Assignment If not ex
Page 17 and 18: The direction and scale speed displ
Page 19 and 20: 18 2.2 Emergency Stop Pressing [Alt
Page 21 and 22: 20 Diagram 8: Object Operation Head
Page 23 and 24: 22 Turnout Operation / Switchboard
Page 25 and 26: 24 2.4 Blocks / AutoTrain With +Sma
Page 27 and 28: In Keyboard mode the 16 grey and bl
Page 29 and 30: selecting “Double Slip 2” for s
Page 31 and 32: 30 3 Using +SmartHand Mobile Handhe
Page 33 and 34: • With additional optional button
Page 35 and 36: 34 3.2 Operation of Turnouts and Si
Page 37 and 38: 36 Operation of Turntables After ta
Page 39: ! handheld is currently not in use
Page 43 and 44: Toggle Train Direction with Arrow K
Page 45 and 46: this way it is possible to define a
Page 47 and 48: This transfer must be repeated late
Page 49 and 50: Germany is selected, for example, t
Page 51 and 52: tation, then the train view is auto
Page 53 and 54: 52 Diagram 22: Privileges tab May a
Page 55 and 56: 54 Diagram 23: Favourites tab By se
Page 57 and 58: 56 Diagram 25: Message Display By p
Page 59 and 60: Handheld Computer Keyboard Computer
Page 61 and 62: ! It is also important that the req
Page 63 and 64: to the collection. New files have t
Page 65 and 66: ! view after selecting a train in a
Page 67: AutoTrain 24, 35 Baud Rate 39 Block

Download - Freiwald Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?