Download - Freiwald Software

This field shows the address, which must be entered into the address bar of the Web
browser of the mobile device to connect to the Web server. The address bar looks as
follows:
http:// [: ]
where is the name or IP address of that computer on which the
+SmartHand Mobile Web Server is running and the optional a value, which
can be set via the advanced settings for experts. If more than one network adapter is installed
on your computer, then it may be, that the value displayed as is not
appropriate. This is the case when mobile devices connect over another network adapter
than the one that was used to determine this value. In this case, the display of
must be ignored. Instead the name or address of the computer in that
network must be determined by other means, through which the mobile devices connect
to the computer.
Advanced:
This option allows advanced users to make additional settings for the Web server. These
settings are described in Section 6.2, “Operation“ below. For normal operation of
+SmartHand Mobile these advanced settings are not necessarily required.
40
4.2 Customizing +SmartHand Classic Handhelds
The following options allow to customize the handling of each Classic handheld to personal
preferences: