6.3 Suspended Ceiling Design Process - Bilkent University

More documents

Recommendations

Info

Lighting Fixture Quantity: The amount of the lighting fixtures required in the space to which the suspended ceiling is applied. Lighting Fixture Size: The sizes of the lighting fixtures to be placed within the plenum. Lighting Fixture Weight: The weight of the lighting fixture to be used within the suspended ceiling system. Load Test Data: The load carrying capacity of the main beams and the cross tees of the suspended ceiling. Main Runner and Cross Tee Color: The color of the main runners and the cross tees. Main Runner and Cross Tee End Detail: The detail of the uppermost part of the profiles which is used to connect the profiles to the hangers (e.g. peaked or straight). Main Runner and Cross Tee Face Dimension: The width of the lowest part of the main runner and the cross tee. Main Runner and Cross Tee Interface: The connection detail of the main runners and the cross tees (e.g. override, or flushfit). Main Runner and Cross Tee Profile Length: The profile length of the main runners and the cross tees. Main Runner and Cross Tee Structural Classification: The classification of the system according to the load carrying capability of grid components in kilograms per meter. There are three types in general: heavy duty, intermediate duty, and light duty. Main Runner and Cross Tee Surface Finish: The type of surface finish applied to the main runners and cross tees. Main Runner and Cross Tee Web Height: The height of the main runner and the cross tee measured from the face to the top of the top bulb. Main Runner and Cross Tee Weight: The weight of the main runner and the cross tee. Maximum Air Diffuser Weight: The maximum allowed air diffuser weight in the suspended ceiling structure. Maximum Lighting Fixture Weight: The maximum allowed lighting fixture weight in the suspended ceiling structure. Panel Acoustics CAC: <strong>Ceiling</strong> Attenuation Class (CAC) rates a ceiling's efficiency as a barrier to airborne sound transmission between adjacent closed spaces. 209
Panel Acoustics NRC: Noise Reduction Coefficient (NRC) of the suspended ceiling panel rates of ability of a ceiling panel to absorb sound. This value may typically range from 0.4 to 1.00. Panel Antimicrobial Treatment: A treatment applied to inhibit or retard growth of mold or mildew on products' painted surfaces. Panel Color: The color of the suspended ceiling panel. Panel Edge and Joint Detail: The type of joint applied at the panel edges (e.g. reveal, flush reveal, square edge, etc.) Panel Fire Resistance: The suspended ceiling’s property of acting as a barrier to fire. Acoustical ceiling systems form a membrane to contain fire within a room. Fire-rated assemblies are given ratings of one, two, three, or four hours. Panel Humidity Resistance: The resistance of the suspended ceiling panel to the relative humidity. Standard acoustical panels are designed for installation within the normal occupancy condition range of maximum 70% relative humidity. When the in-service use relative humidity is expected to exceed this range, the use of acoustical units specifically designed for these applications should be considered. Panel Material: The material of the suspended ceiling panel. Panel Sag Resistance: The resistance of the suspended ceiling panel to sag. Panel Surface Pattern: <strong>Suspended</strong> ceiling panels may be one of or a combination of two or more of the following patterns: perforated, fissured, textured, smooth, printed, embossed, surface scored, and random swirl. Panel Surface Reflectance: The suspended ceiling’s property of reflecting light. The measure of light reflectance is that fraction of the specified incident light, which is reflected by the surface. Panel Thermal Insulation Value: (R factor) A number measuring a material's resistance to heat flow. R stands for resistance, the inverse of conductivity. Panel Thickness: The thickness of the suspended ceiling panel. Panel Weight: The weight of a single panel. Panel Width and Length: The width and length of the suspended ceiling panels. Plenum Depth: The space above the suspended ceiling in which beams, HVAC and lighting equipment are concealed. 210
Page 1 and 2:
REPRESENTING INFORMATION FLOW IN BU
Page 3 and 4:
ABSTRACT REPRESENTING INFORMATION F
Page 5 and 6:
ACKNOWLEDGEMENTS Foremost, I would
Page 7 and 8:
2.2.3.4 Types of Information Models
Page 9 and 10:
5.3.3.1 Classification According to
Page 11 and 12:
8.3 Suggestions for Further Researc
Page 13 and 14:
LIST OF FIGURES Figure 1.1: A Gener
Page 15 and 16:
Figure 6.13: Initial Parameter-base
Page 17 and 18:
in many building projects. This is
Page 19 and 20:
process modeling method for buildin
Page 21 and 22:
educational approaches, studies of
Page 23 and 24:
2. COLLABORATIVE DESIGN RESEARCH IN
Page 25 and 26:
graphical interface to the Internet
Page 27 and 28:
member are not agreed to by other m
Page 29 and 30:
There is also considerable interest
Page 31 and 32:
models are interdependent and they
Page 33 and 34:
5. Incomplete, uncertain, and untim
Page 35 and 36:
2.2.3.3 Advantages of the Informati
Page 37 and 38:
process development effort is highl
Page 39 and 40:
emerge at the early 1970s, moved aw
Page 41 and 42:
the GDCPP. From the point of view o
Page 43 and 44:
3.2.1 Network Models Network models
Page 45 and 46:
interpreted as resources. The idea
Page 47 and 48:
(1999) applied these concepts to a
Page 49 and 50:
Input Figure 3.5: A Generic IDEF0 D
Page 51 and 52:
world with an independent existence
Page 53 and 54:
Figure 3.7: A Generic UML Activity
Page 55 and 56:
side indicating the scheduled start
Page 57 and 58:
4. DESIGN STRUCTURE MATRIX METHOD T
Page 59 and 60:
need to be made. No optimal method
Page 61 and 62:
aim is to move the above diagonal m
Page 63 and 64:
is built, it can serve as a platfor
Page 65 and 66:
4.2.1 Component-based DSM System en
Page 67 and 68:
epresenting them as connections bet
Page 69 and 70:
Kusiak, 1996). While the DSM can be
Page 71 and 72:
since high-level processes sometime
Page 73 and 74:
(a) (b) Figure 4.6: A Parameter-bas
Page 75 and 76:
2. Importance ratings: A scale can
Page 77 and 78:
Besides adding extra attributes to
Page 79 and 80:
versions of the model a binary info
Page 81 and 82:
problem without the framework model
Page 83 and 84:
select a task for decomposition and
Page 85 and 86:
developed such as interaction chart
Page 87 and 88:
contracts. In current practice for
Page 89 and 90:
completed. The former is called une
Page 91 and 92:
Browning, 1998) found that addition
Page 93 and 94:
A parameter-based DSM may provide i
Page 95 and 96:
5.2.2 Process Integration The situa
Page 97 and 98:
Figure 5.1: Two Coupled Activities
Page 99 and 100:
Although representing parameter val
Page 101 and 102:
5.3.1 Assumptions and Scope of the
Page 103 and 104:
In order to develop the IFC specifi
Page 105 and 106:
object must support a variety of AE
Page 107 and 108:
Figure 5.6: Four different Views of
Page 109 and 110:
countries which have a classificati
Page 111 and 112:
process integration. Therefore, in
Page 113 and 114:
technical terms. Furthermore, some
Page 115 and 116:
the DSM and to denote the performan
Page 117 and 118:
ased DSM. Since such DSMs are low-l
Page 119 and 120:
modeling of information management
Page 121 and 122:
Architect Design Engineers User Int
Page 123 and 124:
Figure 5.12: A Workflow Proposal fo
Page 125 and 126:
study, which analyzes elevator desi
Page 127 and 128:
parameters were defined according t
Page 129 and 130:
plenum, hangers, and wall angles. T
Page 131 and 132:
suspension system. Fittings support
Page 133 and 134:
constraints to the integrated syste
Page 135 and 136:
leaded by a chief engineer. Design
Page 137 and 138:
P8 P8 P8 P8 P8 P8 P8 P8 180 90 180
Page 139 and 140:
Infrastructure design: 2 people At
Page 141 and 142:
6.4.4.1 The Design Configuration Th
Page 143 and 144:
parameter relationships. However, o
Page 145 and 146:
Study Feasibility A1 Select Suspend
Page 147 and 148:
Figure 6.7: An IDEF0 Model of Suspe
Page 149 and 150:
Figure 6.9: An IDEF0 Model of Suspe
Page 151 and 152:
Figure 6.10: An Example System Desc
Page 153 and 154:
Performance Requirements System Lev
Page 155 and 156:
Performance Requirements System Lev
Page 157 and 158:
Thermal Performance Lighting Perfor
Page 159 and 160:
6.5 Results and Discussion 6.5.1 Ob
Page 161 and 162:
plenum. Several different schemes m
Page 163 and 164:
6.5.3 A Comparison between the Asse
Page 165 and 166:
performance requirements drive desi
Page 167 and 168:
finding supports the comments made
Page 169 and 170:
applied by an electric driving mach
Page 171 and 172:
surfaces. One rail is installed on
Page 173 and 174: Elevator design process begins with
Page 175 and 176: Having decided the car, hoistway, a
Page 177 and 178: 4. It is assumed that there is no n
Page 179 and 180: 2. Occasionally, different design p
Page 181 and 182: Figure 7.2: The Context Diagram of
Page 183 and 184: Figure 7.4: An IDEF0 Model of Eleva
Page 185 and 186: Figure 7.6: An IDEF0 Model of Detai
Page 187 and 188: System Level Parameters Analyze Ele
Page 189 and 190: Building Type Building Style Tenanc
Page 191 and 192: time, round trip time, and number o
Page 193 and 194: there are large cycles. This sugges
Page 195 and 196: such formulas than suspended ceilin
Page 197 and 198: Furthermore, it was observed in the
Page 199 and 200: 3. In order to deal with large DSMs
Page 201 and 202: observed in the case studies includ
Page 203 and 204: while an aircraft or ship may have
Page 205 and 206: developers can use the method to in
Page 207 and 208: Baldwin, A. N., Austin, S., Hassan,
Page 209 and 210: Denker, S., Steward, D. and Brownin
Page 211 and 212: Karhu, V. (2001). A Model based App
Page 213 and 214: Problematics. (2003). Problematics
Page 215 and 216: Suh, N. P. (1998). Axiomatic Design
Page 217 and 218: January 20, 2003, from http://www.c
Page 219 and 220: A.1 Classification of Building Part
Page 221 and 222: • Time (aesthetic service life)
Page 223: B.1 Suspended Ceiling Design Parame
Page 227 and 228: B.2 Elevator Design Parameter Defin
Page 229 and 230: Floor Area: The areas of the floors
Page 231 and 232: UpPeak Interval: The interval betwe
Page 233 and 234: C.1 A Computer Program For Building
Page 235 and 236: Figure 3. Unpartitioned Matrix The
Page 237 and 238: 'fill in matrix titles For counter
Page 239 and 240: 4. Open the sheet “partitioned DS
Page 241 and 242: End With For i = 1 To n Cells(i + 2
Page 243 and 244: End If Next j total_row(i) = k 'ass
show all

6.3 Suspended Ceiling Design Process - Bilkent University

Create successful ePaper yourself

Delete template?

Save as template?