RF MODULE

4 On the Pointwise Constraints page, specify the following bounds for the parameters
you just defined:
LB EXPRESSION UB
1e-3 k 1e-1
0.4 l 0.6
0 0.1*l-k 0.1
MESH GENERATION
1 From the Mesh menu, choose Free Mesh Parameters.
2 Click the Point tab.
3 Select Points 8 and 10, then set the Maximum element size to 5e-4.
4 Click the Boundary tab.
5 Select Boundaries 3 and 5, then set the Maximum element size to 5e-4.
6 Select Boundaries 7 and 9, then set the Maximum element size to 2e-3.
7 Click the Global tab.
8 From the Predefined mesh sizes list, select Fine.
9 Click OK.
10 Click the Initialize Mesh button on the Main toolbar.
COMPUTING THE SOLUTION
1 Click the Solver Parameters button on the Main toolbar.
2 Clear the Optimization/Sensitivity check box
OPTIMIZING THE SHAPE OF A DIPOLE ANTENNA | 93