hempel product data sheets

Recommendations

Info

- 3 - - - Short-oil alkyd, styrenated alkyd, epoxyester, silicone alkyd, urethane alkyd - 4 - - - Miscellaneous - 5 - - - Reactive binder (non-oxidative), one or two-component - 6 - - - Physically drying binder (solvent-borne) (other than - 0 - - -) - 7 - - - Miscellaneous - 8 - - - Aqueous dispersion, thinner - 9 - - - Miscellaneous Example: HEMPADUR 15570: 1 - - - - Primer for steel - 5 - - - Reactive binder - - 57 - Serial number - - - - 0 Standard formula SHADE NUMBERS: Hempel paints are supplied in colours identified by a 5-digit, standard shade number as follows: White : 10000 Whitish, grey : 10010-19980 Black : 19990 Yellow, cream, buff : 20010-29990 Blue, violet : 30010-39990 Green : 40010-49990 Red, orange, pink : 50010-59990 Brown : 60010-69990 Example: HEMPALIN PRIMER 12050-50410: 50410 = red shade Hempel’s standard shade numbers do not directly correlate to official colour standard numbers. However, colours corresponding to specific official standard colours may be established. Frequently used colours/shades are displayed in HEMPEL’s colour cards. The fifth digit may be used to identify specific formulas with the same shade, but a different type of pigments used, eg conformity to (local) legislation. 0 indicates a standard formulation, 6 lead-containing pigments. Note: The shades of primers, many intermediates and antifoulings may fluctuate as a distinct shade is not important for such products. Description: A short description of the product with emphasis on generic type, pigmentation, principal properties, and certain limitations. Recommended use: The purpose(s) for which the product is designed or particularly well suited. The product may be specified for other uses in tailormade paint systems for specific purposes. Service temperature: Indicates the maximum temperature that will have no immediate detrimental effect on the paint. Issued: October 1999/Page 2A of 9 EXPLANATORY NOTES Page 2A/9 A service temperature constantly near the maximum will result in a shorter lifetime of the specified paint system compared to the lifetime anticipated when operating at normal temperatures. If service temperatures are often fluctuating between normal temperatures and near maximum temperatures this will result in an additional decrease in the anticipated lifetime of the paint system ("accelerated ageing"). Most paints will change appearance when exposed to high temperatures, either by a direct change of colour or by loosing gloss.
Approvals, certificates: A list of official and semi-official certificates and approvals. Other certificates and approvals than listed may be available from the nearest HEMPEL office. Availability: Delivery of certain products require notice in advance for logistic reasons. This is indicated by the expression “Local availability subject to confirmation”. PHYSICAL CONSTANTS Finish: The appearance of the paint film after drying under optimum conditions in laboratory, given as high gloss (>90), glossy (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (
Page 1 and 2: HEMPEL Product Data Manual
Page 3 and 4: 敬启者欢迎您使用此电子
Page 5 and 6: Numerical Index Page 1/2 DATA SHEET
Page 7: EXPLANATORY NOTES TO PRODUCT DATA S
Page 11 and 12: Drying times refer to a temperature
Page 13 and 14: Example: If 0.5 litre of THINNER is
Page 15 and 16: SUBSEQUENT COAT: Recommendations of
Page 17 and 18: ISO 8501-1:1988 Designation Descrip
Page 19 and 20: SSPC Designation Description SURFAC
Page 21 and 22: Quantitative description With the p
Page 23 and 24: CONVERSION TABLES To convert From T
Page 25 and 26: FORMULAS FOR ESTIMATING SURFACE ARE
Page 27 and 28: CONVERSION TABLES Page 5D/5 ESTIMAT
Page 29 and 30: 53240 - HEMPALIN PRIMER 12050/HEMPA
Page 31 and 32: 15280 - HEMPEL'S SHOPPRIMER E 15280
Page 33 and 34: 45141/ - HEMPADUR 4514 (B, RS & C)
Page 35 and 36: I-23 CAMERA DI COMMERCIO INDUSTRIA
Page 37 and 38: X-3 DEPARTMENT OF HOUSING AND CONST
Page 39 and 40: X-16 DEUTSCHE BAHN, Germany 13200 -
Page 41 and 42: CERTIFICATES & APPROVALS (by produc
Page 43 and 44: * HEMPADUR ZINC 15360 * WELDING PRI
Page 45 and 46: * HEMPEL'S GALVOSIL 15700 * NON-CON
Page 47 and 48: * HEMPEL'S POLYESTER GF 35920/35923
Page 49 and 50: * HEMPADUR MULTI-STRENGTH 45742 * M
Page 51 and 52: CERTIFICATES & APPROVALS (by produc
Page 53 and 54: * HEMPADUR 85671 * NON-CONTAMINATIO
Page 55 and 56: 2. HEMPEL’S MARINE VARNISH 02220
Page 57 and 58: 2. HEMPEL'S VARNISH 03330 SURFACE O
Page 59 and 60:
2. HEMPADUR VARNISH 05150 SURFACE T
Page 61 and 62:
2. HEMPADUR VARNISH 05170 SURFACE T
Page 63 and 64:
2. HEMPADUR SEALER 05970 SURFACE Al
Page 65 and 66:
2. HEMPEL'S HI-VEE LACQUER 06520 AP
Page 67 and 68:
2. HEMPEL’S THINNERS 08... HEMPEL
Page 69 and 70:
2. HEMPINOL 10220 SURFACE New steel
Page 71 and 72:
2. HEMPEL’S BALLAST COAT SH 10880
Page 73 and 74:
2. HEMPALIN PRIMER 12050 SURFACE Ne
Page 75 and 76:
HEMPEL’S UNI-PRIMER 13140 SURFACE
Page 77 and 78:
2. HEMPALIN PRIMER HI-BUILD 13200 S
Page 79 and 80:
2. HEMPAQUICK PRIMER 13624 SURFACE
Page 81 and 82:
2. HEMPADUR LTC 15030 SURFACE New s
Page 83 and 84:
HEMPADUR 15100 SURFACE New steel: A
Page 85 and 86:
2. HEMPADUR 15130 SURFACE New steel
Page 87 and 88:
HEMPEL’S SHOPPRIMER E 15280 SURFA
Page 89 and 90:
2. HEMPADUR PRIMER 15300 SURFACE Ne
Page 91 and 92:
2. HEMPADUR ZINC 15341 SURFACE New
Page 93 and 94:
Physical data Drying time and recoa
Page 95 and 96:
HEMPADUR®ZINC 15360 CURING AGENT 9
Page 97 and 98:
APPLICATION INSTRUCTIONS For produc
Page 99 and 100:
The minimum recoating intervals ass
Page 101 and 102:
2. HEMPADUR 15400 SURFACE Abrasive
Page 103 and 104:
The compressed air must be dry and
Page 105 and 106:
One litre undiluted HEMPADUR 15400
Page 107 and 108:
Safety: Handle with care. Before an
Page 109 and 110:
HEMPADUR 15500 SURFACE For optimum
Page 111 and 112:
HEMPADUR 15500 In case steel grit i
Page 113 and 114:
HEMPADUR 15500 Micro climate: The a
Page 115 and 116:
HEMPADUR 15500 Control of For the s
Page 117 and 118:
HEMPADUR®15552 CURING AGENT 97290
Page 119 and 120:
HEMPADUR®FAST DRY 15560 CURING AGE
Page 121 and 122:
Page 123 and 124:
HEMPADUR 15570 APPLICATION INSTRUCT
Page 125 and 126:
HEMPADUR®15590/ HEMPADUR®15591 Me
Page 127 and 128:
HEMPEL’S GALVOSIL®15700 HEMPEL
Page 129 and 130:
HEMPEL’S GALVOSIL 15700 APPLICATI
Page 131 and 132:
HEMPEL’S GALVOSIL 15700 When pain
Page 133 and 134:
HEMPEL’S GALVOSIL 15700 With temp
Page 135 and 136:
HEMPEL’S GALVOSIL 15700 One way t
Page 137 and 138:
HEMPEL’S GALVOSIL®15780 HEMPEL
Page 139 and 140:
Page 141 and 142:
The coating must be wet and smooth
Page 143 and 144:
2. Zinc silicate surface with extre
Page 145 and 146:
2. HEMPEL’S SHOPPRIMER ZS 15890 S
Page 147 and 148:
Airless spray equipment: A large, s
Page 149 and 150:
Safety precautions: Handle with car
Page 151 and 152:
2. HEMPEL’S SILICONE ZINC 16900 S
Page 153 and 154:
HEMPADUR ZINC 17360 SURFACE Remove
Page 155 and 156:
HEMPADUR 17630/17633 SURFACE New st
Page 157 and 158:
HEMPADUR 17630/17633 Spot-checking
Page 159 and 160:
HEMPADUR 17630/17633 Application: F
Page 161 and 162:
HEMUCRYL®PRIMER HI-BUILD 18030 Des
Page 163 and 164:
Page 165 and 166:
HEMUCRYL®TI-COAT 18200 Description
Page 167 and 168:
Page 169 and 170:
HEMUDUR®18500 CURING AGENT 97710 D
Page 171 and 172:
HEMUDUR®ZINC 18560 ZINC POWDER 971
Page 173 and 174:
HEMPATEX®E.V. PRIMER 19151 Former
Page 175 and 176:
HEMPADUR®FILLER 35250 CURING AGENT
Page 177 and 178:
HEMPADUR®SPRAY-GUARD®35490/ HEMPA
Page 179 and 180:
HEMPADUR®SPRAY-GUARD®35490/ HEMPA
Page 181 and 182:
Mixing machine: For large jobs the
Page 183 and 184:
Discontinuities and areas with too
Page 185 and 186:
HEMPADUR®MULTI-STRENGTH®35530 CUR
Page 187 and 188:
HEMPADUR MULTI-STRENGTH 35530 APPLI
Page 189 and 190:
HEMPADUR MULTI-STRENGTH 35530 Proce
Page 191 and 192:
HEMPADUR MULTI-STRENGTH 35530 Venti
Page 193 and 194:
2. HEMPEL’S POLYESTER GF 35920 SU
Page 195 and 196:
HEMPEL'S POLYESTER GF 35920 The pum
Page 197 and 198:
HEMPALIN®UNDERCOAT 42460 Descripti
Page 199 and 200:
Page 201 and 202:
HEMPADUR®45141/ HEMPADUR®45143 Hi
Page 203 and 204:
HEMPADUR 45141/45143 APPLICATION IN
Page 205 and 206:
HEMPADUR 45141/45143 The finished c
Page 207 and 208:
HEMPADUR 45141/45143 Physical data
Page 209 and 210:
HEMPADUR 45150 SURFACE Repair and m
Page 211 and 212:
HEMPADUR 45150 When used for immers
Page 213 and 214:
HEMPADUR 45150 Physical data HEMPAD
Page 215 and 216:
HEMPADUR 45182 SURFACE New steel: A
Page 217 and 218:
HEMPADUR HI-BUILD 45200 SURFACE New
Page 219 and 220:
HEMPADUR HI-BUILD 45221 APPLICATION
Page 221 and 222:
HEMPADUR MULTI-STRENGTH 45540 SURFA
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
HEMPADUR MASTIC 45880/45881 SURFACE
Page 229 and 230:
HEMPADUR MASTIC 45880/45881 Full co
Page 231 and 232:
HEMPADUR MASTIC 45880/45881 Physica
Page 233 and 234:
HEMPADUR MASTIC 45880/45881 Specifi
Page 235 and 236:
2. HEMPADUR MARINE MASTIC 45880 SUR
Page 237 and 238:
HEMPADUR MARINE MASTIC 45880 Note:
Page 239 and 240:
HEMPADUR MARINE MASTIC 45880 Physic
Page 241 and 242:
HEMPATEX®HI-BUILD 46330 Descriptio
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
HEMPEL'S SILVIUM®51570 Description
Page 251 and 252:
HEMPALIN®ENAMEL 52140 Description:
Page 253 and 254:
HEMPALIN®ENAMEL HI-BUILD 52220 Des
Page 255 and 256:
HEMPALIN®DANREX®52360 Description
Page 257 and 258:
HEMPALIN®DECKPAINT 53240 Descripti
Page 259 and 260:
HEMPATHANE®ENAMEL 55100 CURING AGE
Page 261 and 262:
HEMPATHANE®TOPCOAT 55210 CURING AG
Page 263 and 264:
HEMPEL’S ENAMEL 55850 CURING AGEN
Page 265 and 266:
HEMPATHANE®TOPCOAT 55910 CURING AG
Page 267 and 268:
HEMPAFLEX®ANTI-STAIN 56220 Descrip
Page 269 and 270:
HEMPATEX®ENAMEL 56360 Description:
Page 271 and 272:
HEMPATEX®56430 Description: HEMPAT
Page 273 and 274:
HEMPEL'S HI-VEE®56540 Description:
Page 275 and 276:
HEMPEL’S SILICONE TOPCOAT 56900 D
Page 277 and 278:
HEMPEL’S SILICONE ALUMINIUM 56910
Page 279 and 280:
HEMPEL’S SILICONE ACRYLIC 56940 D
Page 281 and 282:
HEMUCRYL®ENAMEL HI-BUILD 58030 Des
Page 283 and 284:
Page 285 and 286:
HEMUCRYL®TOPCOAT HI-BUILD 58230 De
Page 287 and 288:
Page 289 and 290:
HEMPEL’S ANTI-SLIP BEADS 67420 De
Page 291 and 292:
HEMPEL’S ANTIFOULING COMBIC®7199
Page 293 and 294:
HEMPEL’S ANTIFOULING ECONOMIC SP-
Page 295 and 296:
HEMPEL’S ANTIFOULING NAUTIC®SP-A
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
HEMPEL’S ANTIFOULING GLOBIC®SP-E
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
HEMPEL’S ANTIFOULING OCEANIC®849
Page 309 and 310:
HEMPEL’S ANTIFOULING OCEANIC®849
Page 311 and 312:
Page 313 and 314:
HEMPADUR 85671 APPLICATION INSTRUCT
Page 315 and 316:
HEMPADUR 85671 c. Allow the mixed p
Page 317 and 318:
HEMPADUR 85671 Curing time: Provide
Page 319 and 320:
HEMPEL'S LIGHT CLEAN 99350 Descript
Page 321 and 322:
HEMUCRYL®THINNER 99800 Description
Page 323 and 324:
老人牌老人牌产品说明书
Page 325 and 326:
产品说明书介绍产品说明
Page 327 and 328:
无空气喷涂时比用刷涂为
Page 329 and 330:
常用单位换算表常用单位
Page 331 and 332:
特性用途老人牌海洋性
Page 333 and 334:
特性用途 “老人”牌清
Page 335 and 336:
特性用途老人牌环氧清
Page 337 and 338:
特性用途老人牌环氧清
Page 339 and 340:
特性用途老人牌环氧封
Page 341 and 342:
特性用途老人牌抗紫外
Page 343 and 344:
特性用途批准 “老人
Page 345 and 346:
特性用途批准老人牌
Page 347 and 348:
特性用途老人牌醇酸防
Page 349 and 350:
特性用途老人牌环氧酯
Page 351 and 352:
特性用途老人牌醇酸厚
Page 353 and 354:
特性用途 “老人”牌快
Page 355 and 356:
特性用途老人牌环氧低
Page 357 and 358:
特性用途老人牌环氧漆1
Page 359 and 360:
Page 361 and 362:
特性用途老人牌环氧车
Page 363 and 364:
特性用途老人牌环氧底
Page 365 and 366:
特性用途使用温度干燥
Page 367 and 368:
“老人”牌环氧富锌漆15341
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
老人牌环氧漆15400施工指导
Page 379 and 380:
老人牌环氧漆15400 施工指
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
老人牌环氧漆15500 施工指
Page 387 and 388:
Page 389 and 390:
特性用途老人牌快干环
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
特性用途使用温度干燥
Page 397 and 398:
特性用途老人牌含硅富
Page 399 and 400:
老人牌含硅富锌漆15700施工
Page 401 and 402:
“老人”牌含硅富锌漆15700
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
“老人”牌硅酸锌车间底
Page 413 and 414:
“老人”牌硅酸锌车间底
Page 415 and 416:
特性用途老人牌硅酮富
Page 417 and 418:
特性用途老人牌环氧富
Page 419 and 420:
特性用途 “老人”牌环
Page 421 and 422:
老人牌环氧漆17630/17633施工
Page 423 and 424:
“老人”牌环氧漆17630/17633
Page 425 and 426:
特性用途老人牌水性丙
Page 427 and 428:
范围老人牌水性丙烯酸漆
Page 429 and 430:
Page 431 and 432:
范围老人牌水性丙烯酸漆
Page 433 and 434:
特性用途老人牌水性环
Page 435 and 436:
特性用途老人牌水性环
Page 437 and 438:
Page 439 and 440:
特性用途老人牌环氧修
Page 441 and 442:
Page 443 and 444:
老人牌环氧漆35490/35493施工
Page 445 and 446:
使用步骤蜗轮泵和软管泵
Page 447 and 448:
老人牌环氧漆35490/35493手工
Page 449 and 450:
"老人"牌超强度环氧漆35530
Page 451 and 452:
“老人”牌超强度环氧漆35
Page 453 and 454:
Page 455 and 456:
"老人"牌玻璃鳞片聚酯漆359
Page 457 and 458:
老人牌玻璃鳞片聚酯漆35920
Page 459 and 460:
“老人”牌醇酸中间漆42460
Page 461 and 462:
“老人”牌环氧漆45080 产
Page 463 and 464:
“老人”牌环氧漆45141/45143
Page 465 and 466:
“老人”牌环氧漆45141/45143
Page 467 and 468:
“老人”牌环氧漆45141/45143
Page 469 and 470:
“老人”牌环氧漆45141/45143
Page 471 and 472:
“老人”牌环氧漆45150 产
Page 473 and 474:
“老人”牌环氧漆45150 施
Page 475 and 476:
Page 477 and 478:
“老人”牌环氧过渡漆45182
Page 479 and 480:
“老人”牌环氧厚浆漆45200
Page 481 and 482:
“老人”牌环氧厚浆漆45221
Page 483 and 484:
Page 485 and 486:
“老人”牌超强环氧漆45742
Page 487 and 488:
Page 489 and 490:
“老人”牌厚浆环氧漆45880
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
老人牌厚浆环氧漆45880施工
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
“老人”牌氯化橡胶厚浆
Page 505 and 506:
“老人”牌丙烯酸厚浆漆46
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
“老人”牌银仓漆51560 产
Page 513 and 514:
“老人”牌铝粉漆51570 产
Page 515 and 516:
“老人”牌醇酸磁漆52140
Page 517 and 518:
“老人”牌醇酸厚浆磁漆52
Page 519 and 520:
“老人”牌半光醇酸漆52360
Page 521 and 522:
“老人”牌快干甲板漆53240
Page 523 and 524:
“老人”牌聚氨酯磁漆55100
Page 525 and 526:
“老人”牌聚氨酯面漆55210
Page 527 and 528:
“老人”牌磁漆55850 产品
Page 529 and 530:
Page 531 and 532:
“老人”牌抗锈斑面漆56220
Page 533 and 534:
“老人”牌丙烯酸磁漆56360
Page 535 and 536:
“老人”牌丙烯酸漆56430
Page 537 and 538:
“老人”牌丙烯酸荧光漆56
Page 539 and 540:
“老人”牌硅酮面漆56900
Page 541 and 542:
“老人”牌硅酮铝粉漆56910
Page 543 and 544:
“老人”牌硅酮丙烯酸漆56
Page 545 and 546:
“老人”牌水性丙烯酸厚
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
特性用途物理参数颜
Page 555 and 556:
老人牌无锡自抛光防污漆71
Page 557 and 558:
老人牌自抛光经济型防污
Page 559 and 560:
老人牌自抛光防污漆NAUTICSP
Page 561 and 562:
老人牌自抛光防污漆NAUTICSP
Page 563 and 564:
老人牌自抛光防污漆79070
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
老人牌环氧漆85671 产品说
Page 577 and 578:
“老人”牌环氧漆85671 稀
Page 579 and 580:
Page 581 and 582:
特性用途物理参数漆面
Page 583 and 584:
特性用途物理参数漆面
Page 585 and 586:
目錄品說明書介紹閃鏽
Page 587 and 588:
閃比重表乾指觸乾油
Page 589 and 590:
加塗油漆建議能與某品配
Page 591 and 592:
常用單位換算表由非法定
Page 593 and 594:
特性用途老人牌海洋性
Page 595 and 596:
特性用途 “老人”牌清
Page 597 and 598:
特性用途老人牌氧清漆
Page 599 and 600:
特性用途老人牌氧清漆
Page 601 and 602:
特性用途老人牌氧封閉
Page 603 and 604:
特性用途老人牌抗紫外
Page 605 and 606:
特性用途批準 “老人
Page 607 and 608:
特性用途批準老人牌
Page 609 and 610:
特性用途老人牌醇酸防
Page 611 and 612:
特性用途老人牌氧酯底
Page 613 and 614:
特性用途老人牌醇酸厚
Page 615 and 616:
特性用途 “老人”牌快
Page 617 and 618:
特性用途老人牌氧低溫
Page 619 and 620:
特性用途老人牌氧漆151
Page 621 and 622:
Page 623 and 624:
特性用途老人牌氧車間
Page 625 and 626:
特性用途老人牌氧底漆
Page 627 and 628:
特性用途使用溫度乾燥
Page 629 and 630:
“老人”牌氧富鋅漆15341
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
老人牌氧漆15400施工指導
Page 641 and 642:
老人牌氧漆15400 施工指導
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
老人牌氧漆15500 施工指導
Page 649 and 650:
Page 651 and 652:
特性用途老人牌快乾氧
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
特性用途使用溫度乾燥
Page 659 and 660:
特性用途老人牌含硅富
Page 661 and 662:
老人牌含硅富鋅漆15700施工
Page 663 and 664:
“老人”牌含硅富鋅漆15700
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
“老人”牌硅酸鋅車間底
Page 675 and 676:
“老人”牌硅酸鋅車間底
Page 677 and 678:
特性用途老人牌硅酮富
Page 679 and 680:
特性用途老人牌氧富鋅
Page 681 and 682:
特性用途 “老人”牌氧
Page 683 and 684:
老人牌氧漆17630/17633施工
Page 685 and 686:
“老人”牌氧漆17630/17633
Page 687 and 688:
Page 689 and 690:
範圍老人牌水性丙烯酸漆
Page 691 and 692:
Page 693 and 694:
範圍老人牌水性丙烯酸漆
Page 695 and 696:
特性用途老人牌水性氧
Page 697 and 698:
特性用途老人牌水性氧
Page 699 and 700:
Page 701 and 702:
特性用途老人牌氧修補
Page 703 and 704:
Page 705 and 706:
老人牌氧漆35490/35493施工
Page 707 and 708:
使用步驟蝸輪泵和軟管泵
Page 709 and 710:
老人牌氧漆35490/35493手工
Page 711 and 712:
"老人"牌超強度氧漆35530
Page 713 and 714:
“老人”牌超強度氧漆3553
Page 715 and 716:
Page 717 and 718:
"老人"牌玻璃鱗片聚酯漆359
Page 719 and 720:
老人牌玻璃鱗片聚酯漆35920
Page 721 and 722:
“老人”牌醇酸中間漆42460
Page 723 and 724:
“老人”牌氧漆45080 品說
Page 725 and 726:
“老人”牌氧漆45141/45143
Page 727 and 728:
“老人”牌氧漆45141/45143
Page 729 and 730:
“老人”牌氧漆45141/45143
Page 731 and 732:
“老人”牌氧漆45141/45143
Page 733 and 734:
“老人”牌氧漆45150 品說
Page 735 and 736:
“老人”牌氧漆45150 施工
Page 737 and 738:
Page 739 and 740:
“老人”牌氧過渡漆45182
Page 741 and 742:
“老人”牌氧厚漿漆45200
Page 743 and 744:
“老人”牌氧厚漿漆45221
Page 745 and 746:
Page 747 and 748:
“老人”牌超強氧漆45742
Page 749 and 750:
Page 751 and 752:
“老人”牌厚漿氧漆45880/4
Page 753 and 754:
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
老人牌厚漿氧漆45880施工
Page 761 and 762:
“老人”牌厚漿氧漆45880
Page 763 and 764:
“老人”牌厚漿氧漆45880
Page 765 and 766:
“老人”牌氯化橡膠厚漿
Page 767 and 768:
“老人”牌丙烯酸厚漿漆46
Page 769 and 770:
Page 771 and 772:
Page 773 and 774:
“老人”牌銀倉漆51560 品
Page 775 and 776:
“老人”牌鋁粉漆51570 品
Page 777 and 778:
“老人”牌醇酸磁漆52140
Page 779 and 780:
“老人”牌醇酸厚漿磁漆52
Page 781 and 782:
“老人”牌半光醇酸漆52360
Page 783 and 784:
“老人”牌快乾甲板漆53240
Page 785 and 786:
“老人”牌聚氨酯磁漆55100
Page 787 and 788:
Page 789 and 790:
“老人”牌磁漆55850 品說
Page 791 and 792:
Page 793 and 794:
“老人”牌抗鏽斑面漆56220
Page 795 and 796:
“老人”牌丙烯酸磁漆56360
Page 797 and 798:
“老人”牌丙烯酸漆56430
Page 799 and 800:
“老人”牌丙烯酸熒光漆56
Page 801 and 802:
“老人”牌硅酮面漆56900
Page 803 and 804:
“老人”牌硅酮鋁粉漆56910
Page 805 and 806:
“老人”牌硅酮丙烯酸漆56
Page 807 and 808:
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
特性用途物理參數顏
Page 817 and 818:
老人牌無錫自拋光防汙漆71
Page 819 and 820:
老人牌自拋光經濟型防汙
Page 821 and 822:
老人牌自拋光防汙漆NAUTICSP
Page 823 and 824:
老人牌自拋光防汙漆NAUTICSP
Page 825 and 826:
老人牌自拋光防汙漆79070
Page 827 and 828:
Page 829 and 830:
Page 831 and 832:
Page 833 and 834:
Page 835 and 836:
Page 837 and 838:
老人牌氧漆85671 品說明書(
Page 839 and 840:
“老人”牌氧漆85671 稀釋
Page 841 and 842:
Page 843 and 844:
特性用途物理參數漆面
Page 845:
特性用途物理參數漆面
show all

hempel product data sheets

Create successful ePaper yourself

Delete template?

Save as template?