Catalyst Sun Blade Computer Upgrade Manual - Zzybot.net

On the operator side perform steps 2 through 4. Refer to the figure OperatorSlide Catches.2) Remove the two #10-32 screws at cage nut locations 5 and 8 to loosen theupper slide catch.3) On the operator side, remove the two #10-32 screws at cage nut locations31 and 34 to loosen the lower slide catch and lower strut.4) On the operator side, remove the #10-32 screw from the module mountingcage and remove the lower strut.WarningAfter completing steps 5 and 6, the slide catch assemblies will fallfrom the mainframe rails. Prevent system damage by gripping eachassembly before removing the screws.Nut Bar Locations5 and 8Upper Slide CatchLower Slide CatchNut Bar Locations 31 and 34Operator Slide CatchesCatalyst Sun Blade Computer Upgrade Manual 17