Catalyst Sun Blade Computer Upgrade Manual - Zzybot.net

More documents

Recommendations

Info

Powering upNoteWhen servicing is completed and the equipment is ready to be returned tonormal operating condition, take the following steps.When work is completed, each individual must remove his or her own lock andtag. The last person to remove a lock is responsible for restarting theequipment and ensuring it is safe to reenergize.1) Check equipment and immediate area to ensure that nonessential itemshave been removed and equipment components are operationally intact.2) Check the work area to ensure that all employees have been safelypositioned or removed.3) Verify that the controls are in the proper positions.4) Remove lockout devices and reenergize equipment.5) Use the appropriate power-up sequence indicated in the Installation andCheckout Guide.6) Notify affected employees that the servicing is completed and theequipment is ready for use.Lockout/Tagout Equipment• Locks: Must be identified and used only for lockout.• Tags: Must have the name of the person applying it.• Hasps: Allow for multiple people to perform lockout.• Specialty devices: Valve covers, plug boxes, breaker locks.See the figure Lockout/Tagout Equipment.6 Catalyst Sun Blade Computer Upgrade Manual
A. TagD. Connector BootB. HaspB. HaspC. LockD. ConnectorA. Tag C. LockBootLockout/Tagout EquipmentSpecial CircumstancesPay particular attention to special lockout/tagout circumstances, such as:• Group lockout/tagout• Shift changes• Emergency lock removalLockout/Tagout Summary• Electricity is involved in every part of our business.• Pay attention to your surroundings.• Ask if you are not sure.• Report hazards to your supervisor.• Make sure you take all steps necessary to protect yourself and thosearound you.• Always look for obvious and hidden energy sources.• Remember, lockout/tagout procedures and electrical precautions arefor your safety.Catalyst Sun Blade Computer Upgrade Manual 7
Page 1 and 2: Catalyst Sun Blade Computer Upgrade
Page 3 and 4: Prepare for InstallationThis topic
Page 5: Lockout Sequence1) When servicing i
Page 9 and 10: Remove the Test System CoversRemovi
Page 11 and 12: 9) Disconnect cable 804-182-00 from
Page 13 and 14: Removing the Ultra 10/60 Test Compu
Page 15 and 16: 3) Remove the upper retaining brack
Page 17 and 18: On the operator side perform steps
Page 19 and 20: Transfer the PCI CardsWhen upgradin
Page 21 and 22: 5) Using a Phillips head screwdrive
Page 23 and 24: Installing the Ethernet SwitchThis
Page 25 and 26: Installing the Sun Blade 2500 Test
Page 27 and 28: 3) Plug the power cable (807-372-00
Page 29 and 30: 5) From the service side, mount the
Page 31 and 32: 9) Torque the nuts to 30 in-lb.10)
Page 33 and 34: Sun Blade Mounting SledSecuring Top
Page 35 and 36: 6) Insert a 1/4-20 screw through th
Page 37 and 38: Installing the Sun Blade 2500 Test
Page 39 and 40: 5) From the service side, mount the
Page 41 and 42: Install the Sun Blade 2500 Test Com
Page 43 and 44: 4) Secure the Sun Blade 2500 to the
Page 45 and 46: 6) Insert a 1/4-20 screw through th
Page 47 and 48: Connect the Sun Blade 2500 Cables1)
Page 49 and 50: Install the MonitorsMonitor #1Monit
Page 51 and 52: System VerificationOverviewAt this
Page 53 and 54: Changing a Catalyst Test System's N
Page 55 and 56: NoteIf the part is packaged in a va
Page 57 and 58:
PPartsHandling Procedures 54Return
show all

Catalyst Sun Blade Computer Upgrade Manual - Zzybot.net

Create successful ePaper yourself

Delete template?

Save as template?