Catalyst Sun Blade Computer Upgrade Manual - Zzybot.net

System VerificationOverviewAt this point, the upgrade is complete and is ready to be verified. The SunBlade 1500 comes with Solaris8 and IMAGE software preloaded.System Verification1) Turn on MAIN POWER on the test system to initiate boot sequence.2) Login as user “checkers” When prompted for a password, press the Returnkey.!CautionDO NOT halt the test computer even if the script instructs you to.3) By default, Solaris 8 is equipped with a power management utility that canshut down the computers if left idle. This can impact the computers duringextended production or checkers runs so it is advised to remove thisutility.a. To confirm the utility's presence on the user computer, execute thefollowing:pkginfo | grep "Power Management"If the utility is installed, the following output will result:system SUNWpmowmPower Management OW Utilities Man Pagessystem SUNWpmowr Power Management OW Utilities, (Root)system SUNWpmowuPower Management OW Utilities, (Usr)system SUNWpmr Power Management config file and rc scriptsystem SUNWpmu Power Management binariessystem SUNWpmux Power Management binaries (64-bit)b. To confirm the utility's presence on the test computer, execute thefollowing where "TESTER" is the test computer's hostname:pkginfo -R /export/root/TESTER | grep "Power Management"If the utility is installed, the following output will result:system SUNWpmowrPower Management OW Utilities, (Root)system SUNWpmrPower Management config file and rc scriptc. To remove the power management utility, execute the following on theuser computer:Become root by typing su and when prompted for apassword, press the Return key.Catalyst Sun Blade Computer Upgrade Manual 51