Catalyst Sun Blade Computer Upgrade Manual - Zzybot.net

More documents

Recommendations

Info

Global Customer Service (GCS) CentersOverviewTo order a replacement part, call or fax the nearest Teradyne Global CustomerService (GCS) center. Each center covers a specific region. To locate thenearest Teradyne GCS center in your region, refer to the following pages.NoteIf your order requires immediate attention, please call by telephone. SeeTeradyne Global Customer Service Centers.Procedure for Parts Handling and ReturnNoteTo prevent shipping and Electrostatic Discharge (ESD) damage, follow theparts handling procedures that are described in the following sections.All parts shipped from Teradyne’s Global Customer Service centers arepackaged in materials that protect them during transit. Part of this protectionincludes antistatic packaging. Teradyne recommends that you use thefollowing antistatic precautions when you handle any parts:1) Store the part in its antistatic packaging (for example, antistatic bag andshipping container) until it is required for use. Save the original packingmaterials used to ship the part from Teradyne.2) Ensure that personnel are adequately protected from static charge byrequiring use of an antistatic ground strap when handling the part.3) When returning defective parts to a Teradyne Global Customer Servicescenter, place the part in the original antistatic bag and shipping container.This will help ensure that parts are not damaged by electrostatic dischargeor physically damaged when being returned to Teradyne. For additionalinformation about static-protection precautions, see the Safety section ofyour test system service manual.54 Catalyst Sun Blade Computer Upgrade Manual
NoteIf the part is packaged in a vacuum-sealed anti-static bag, do not open the baguntil the part is ready for use.Procedure for Ordering Replacement PartsTo order a replacement part, call or fax* the nearest Teradyne GlobalCustomer Services center. Refer to Telephone Numbers for GCS Centers: tolocate the nearest Teradyne Global Customer Service center in your region.Have the following information ready when you call or fax for a replacementpart: Customer name and Teradyne customer number. Complete “Ship To” address and “Bill To” address (if the transactionis billable). Customer contact and telephone number. Purchase order or service agreement number - (For Teradyne GCS,have the GCSon-site report number, or sales order number for new installations.). System serial number and system type. Teradyne part number and type of service desired. Quantity required.* If order is for Emergency Service, please call. (Do not fax rush orders.)Catalyst Sun Blade Computer Upgrade Manual 55
Page 1 and 2:
Catalyst Sun Blade Computer Upgrade
Page 3 and 4: Prepare for InstallationThis topic
Page 5 and 6: Lockout Sequence1) When servicing i
Page 7 and 8: A. TagD. Connector BootB. HaspB. Ha
Page 9 and 10: Remove the Test System CoversRemovi
Page 11 and 12: 9) Disconnect cable 804-182-00 from
Page 13 and 14: Removing the Ultra 10/60 Test Compu
Page 15 and 16: 3) Remove the upper retaining brack
Page 17 and 18: On the operator side perform steps
Page 19 and 20: Transfer the PCI CardsWhen upgradin
Page 21 and 22: 5) Using a Phillips head screwdrive
Page 23 and 24: Installing the Ethernet SwitchThis
Page 25 and 26: Installing the Sun Blade 2500 Test
Page 27 and 28: 3) Plug the power cable (807-372-00
Page 29 and 30: 5) From the service side, mount the
Page 31 and 32: 9) Torque the nuts to 30 in-lb.10)
Page 33 and 34: Sun Blade Mounting SledSecuring Top
Page 35 and 36: 6) Insert a 1/4-20 screw through th
Page 37 and 38: Installing the Sun Blade 2500 Test
Page 39 and 40: 5) From the service side, mount the
Page 41 and 42: Install the Sun Blade 2500 Test Com
Page 43 and 44: 4) Secure the Sun Blade 2500 to the
Page 45 and 46: 6) Insert a 1/4-20 screw through th
Page 47 and 48: Connect the Sun Blade 2500 Cables1)
Page 49 and 50: Install the MonitorsMonitor #1Monit
Page 51 and 52: System VerificationOverviewAt this
Page 53: Changing a Catalyst Test System's N
Page 57 and 58: PPartsHandling Procedures 54Return
show all

Catalyst Sun Blade Computer Upgrade Manual - Zzybot.net

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?