AIX 5L Problem Determination - IBM Redbooks

To process a report from the error record template repository, use the following
syntax:
errpt [-a ] [ -t ] [ -d ErrorClassList ] [ -j ErrorID [ ,ErrorID ] ] |
[ -k ErrorID [ ,ErrorID ] ] [ -J ErrorLabel [ ,ErrorLabel ] ] |
[ -K ErrorLabel [ ,ErrorLabel ] ] [ -F FlagList ] [ -T ErrorTypeList ]
[ -y File ] [ -z File ]
Figure 6-2 shows how the errpt command processes a report from the error
record template.
Figure 6-2 The errpt command error record template repository process
Table 6-2 is a listing of the commonly used errpt command flags.
Table 6-2 Commonly used flags of the errpt command
Flag Description
-a Displays information about errors in the error log file in detailed
format. If used in conjunction with the - t flag, all the information
from the template file is displayed.
-c Formats and displays each of the error entries concurrently, that is,
at the time they are logged. The existing entries in the log file are
displayed in the order in which they were logged.
112 IBM ^ Certification Study Guide - AIX 5L Problem Determination Tools and Techniques