AIX 5L Problem Determination - IBM Redbooks

always time to read all of the messages. However, all missed messages can
be found in /var/adm/ras/conslog.
6. Finally, the synchronization of the ODM in the BLV with the ODM from the /
(root) file system is done by the savebase command.
When the cfgcon process is called, different LED codes are shown depending
on which device is configured.
The cfgcon LED codes include:
c31 Console not yet configured. Provides instructions to select console.
c32 Console is an LFT terminal.
c33 Console is a TTY.
c34 Console is a file on the disk.
3.5.1 The /etc/inittab file
The /etc/inittab file supplies configuration scripts to the init process. In
Figure 3-10, the highlighted line is the file record that runs rc.boot with parameter
3.
Figure 3-10 Example of rc.boot 3 in /etc/inittab
Chapter 3. Booting problem determination 31