CLV63x Bar Code Scanner CLV63x Bar Code Scanner - Sick
CLV63x Bar Code Scanner CLV63x Bar Code Scanner - Sick
CLV63x Bar Code Scanner CLV63x Bar Code Scanner - Sick
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety information<br />
Chapter 2 Operating Instructions<br />
2.2 Intended use<br />
<strong>CLV63x</strong> <strong>Bar</strong> <strong>Code</strong> <strong>Scanner</strong><br />
The <strong>CLV63x</strong> <strong>Bar</strong> <strong>Code</strong> <strong>Scanner</strong> is an intelligent sensor for the automatic recognition and decoding<br />
of bar codes on objects e.g. in a conveyor system.<br />
The intended use of the bar code system results from the following description of the function:<br />
• In a reading station, the bar code scanner is installed in a holder, either on the side of<br />
a conveyor system (side reading) or above it (reading from above).<br />
• The bar code scanner transfers the reading data via the host interface to a superordinate<br />
host computer for further processing.<br />
• The bar code scanner is configured/operated using the SOPAS-ET configuration software<br />
that runs on a standard client PC provided by the customer. Communication takes<br />
place using RS-232 or Ethernet.<br />
Important Any warranty claims against SICK AG shall be deemed invalid in the case changes to the bar<br />
code scanner, such as opening the housing, this includes modifications during installation<br />
and electrical installation or changes to the SICK software.<br />
The bar code scanner is only to be operated in ambient air temperature limit.<br />
2.3 General safety precautions and protection measures<br />
Read the general safety precautions thoroughly and observe them during all bar code<br />
scanner activities. Also observe the warning notices above the operational instructions<br />
of each chapter.<br />
2.3.1 Electrical installation work<br />
Risk of injuries due to electrical current!<br />
The optional power supply module CMP400/CMP490 is connected to the power supply<br />
(100 ... 250 V AC/50 ... 60 Hz) in connection module CDM420.<br />
Observe current safety regulations when working with electrical equipment.<br />
Important Electrical installation should only be carried out by qualified staff.<br />
Connect or release current linkages only under de-energised conditions.<br />
Wire cross sections and their correct shields have to be selected and implemented according<br />
to valid engineering standards.<br />
12 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011970/S345/2008-04-16
Change language