CLV63x Bar Code Scanner CLV63x Bar Code Scanner - Sick
CLV63x Bar Code Scanner CLV63x Bar Code Scanner - Sick
CLV63x Bar Code Scanner CLV63x Bar Code Scanner - Sick
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation<br />
Chapter 5 Operating Instructions<br />
5.2.2 Accessories<br />
<strong>CLV63x</strong> <strong>Bar</strong> <strong>Code</strong> <strong>Scanner</strong><br />
The following accessories are not included in the delivery of the bar code scanner. They<br />
have to be ordered separately and placed ready for installation:<br />
• Mounting device, see next chapter<br />
• Connection module CDB620 or CDM420<br />
• Reading pulse sensor for external reading pulse triggering, e. g. photoelectric reflex<br />
switch/photoelectric proximity switch<br />
5.2.3 Mounting device<br />
The bar code scanner is fixed using two blind hole taps (M5) that are each located on the<br />
narrow sides of the device chapter 10.4 <strong>CLV63x</strong> <strong>Bar</strong> <strong>Code</strong> <strong>Scanner</strong> dimensional drawings,<br />
page 90.<br />
The bar code scanner can be mounter using the following SICK holders:<br />
• Bracket no. 2020410<br />
• Quick release clamp no. 2025526<br />
• Bracket no. 2042800<br />
• Round rod holder no. 2042801<br />
The construction of the angle with adapter plate no. 2042800 supports e. g. varied mounting<br />
options and the alignment of the bar code scanner in two axis.<br />
Fig. 5-1: Example: Fixing the bar code scanner with the bracket no. 2042800<br />
The dimensioning of the SICK-holders is shown in chapter 11.5 Dimensional drawing accessories,<br />
page 106.<br />
Alternatively, the user can provide a holder.<br />
The holder should meet the following requirements:<br />
• Stable mounting device<br />
– Adjustable alignment of the bar code scanner in the x and y axis<br />
– The mounting device must be able to bear the weight of the bar code scanner including<br />
its connection cable (depending on the device version) without vibrating.<br />
• Two M5 bolts to fix the bar code scanner.<br />
– The screw length depends on the thickness of the mounting device.<br />
– The maximum thread reach in the bar code scanner is 5 mm (0.2 in) from the housing<br />
surface.<br />
40 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011970/S345/2008-04-16