mitac 8599.pdf - tim.id.au
mitac 8599.pdf - tim.id.au
mitac 8599.pdf - tim.id.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8.3 No Display (1)<br />
Replace monitor<br />
or LCD.<br />
8599 N/B Maintenance<br />
There is no display on both LCD and VGA monitor after power on although the LCD and monitor is known-good.<br />
No Display<br />
Monitor<br />
or LCD module<br />
OK?<br />
Yes<br />
No<br />
Make sure that CPU module,DIMM<br />
memory are installed properly.<br />
Display<br />
OK?<br />
No<br />
Yes<br />
1. Try another known good CPU<br />
module, DIMM module And BIOS.<br />
2. Remove all of I/O device (HDD,<br />
CD-ROM…….) from motherboard<br />
except LCD or monitor.<br />
Display<br />
OK?<br />
No<br />
Yes<br />
Correct it.<br />
1. Replace f<strong>au</strong>lty part.<br />
2. Connect the I/O device to the<br />
M/B one at a <strong>tim</strong>e to find out<br />
which part is c<strong>au</strong>sing the problem.<br />
Replace<br />
Motherboard<br />
Board-level<br />
Troubleshooting<br />
If 378 Port<br />
Have error code<br />
No<br />
Check system clock and reset<br />
circuit.<br />
To be continued<br />
Clock and reset checking<br />
Yes<br />
According error<br />
Cord to repair<br />
101