mitac 8599.pdf - tim.id.au

2.2.11 System Board
Disassembly
8599 N/B Maintenance
1. Remove the battery, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, DIMM module, modem card and
LCD assembly. (Refer to sections 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.2.5, 2.2.6, 2.2.7 and 2.2.8 Disassembly)
2. Disconnect the heatsink’s cable from the system board and remove two screws fastening the heatsink.
(Figure 2-26)
3. Disconnect the speaker’s cable and the touch pad’s cable from the system board.To free the system board, please
remove one screw and four hex nuts that fastening the system board. (Figure 2-27)
Figure 2-26 Free the heatsink
Figure 2-27 Free the system board
66