mitac 8599.pdf - tim.id.au
mitac 8599.pdf - tim.id.au
mitac 8599.pdf - tim.id.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8.13 Mini-PCI Socket Test Error (1)<br />
1. Check if the Mini-PCI CARD device<br />
is installed properly.<br />
2. Confirm Mini-PCI driver is installed ok.<br />
Test<br />
OK?<br />
No<br />
Try another known good<br />
Mini-PCI card device.<br />
Re-test<br />
OK?<br />
No<br />
Yes<br />
Yes<br />
Correct it<br />
Change the f<strong>au</strong>lty<br />
part then end.<br />
8599 N/B Maintenance<br />
An error occurs when a PC card device is installed.<br />
Mini-PCI Socket<br />
Test Error<br />
Replace<br />
Motherboard<br />
Board-level<br />
Troubleshooting<br />
Check the following parts for cold solder or one of the following<br />
parts on the mother-board may be defective, use an oscilloscope<br />
to check the following signal or replace the parts one at a <strong>tim</strong>e and<br />
test after each replacement.<br />
Parts:<br />
U20<br />
J13<br />
R339<br />
D503<br />
Q10<br />
RP5<br />
R120<br />
R220<br />
R299<br />
Signals<br />
+5VS<br />
+3VS<br />
PCI_AD[0:31]<br />
LAD[0:3]<br />
PCI_C/BE#[0:3]<br />
MPCI_PD<br />
PCI_INTC#<br />
CLK_MINIPCI<br />
PCI_REQ2#<br />
PCI_IRDY#<br />
CLKRUN#<br />
PCI_SERR#<br />
PCI_PERR#<br />
PCI_INTD#<br />
PCIRST#<br />
PCI_GNT2#<br />
PCI_PAR<br />
PCI_FRAME#<br />
PCI_TRDY#<br />
PCI_STOP#<br />
PCI_DEVSEL#<br />
125
Change language