mitac 8599.pdf - tim.id.au

8599 N/B Maintenance
4. Remove three screws and free the bottom shielding. (Figure 2-14)
5. Disconnect the cable and remove the two screws. (Figure 2-15)
Figure 2-14 Free the bottom shielding
Reassembly
Figure 2-15 Free the Modem Card
1. Replace the modem card and secure two screws.
2. Reconnect the cable to the system board.
3. Replace the bottom shielding and secure the three screws.
4. Fit the top cover and the housing, then secure the fifteen screws.
5. Replace CD/DVD-ROM, HDD, CPU, keyboard and battery pack. (See sections 2.2.5, 2.2.4, 2.2.3, 2.2.2 and 2.2.1
Reassembly)
59