Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au
Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au
Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Vertical Insertion<br />
(JST)<br />
• Use black stick under<br />
cable to remove.<br />
• Keep connector<br />
level to board when<br />
disconnecting and<br />
reconnecting.<br />
• Press evenly when<br />
reconnecting or<br />
connector can be<br />
tipped up and not fully<br />
seated.<br />
Examples:<br />
• fan cables<br />
• heatsink sensor, if<br />
prov<strong>id</strong>ed<br />
• right speaker<br />
• left speaker and<br />
microphone on<br />
unders<strong>id</strong>e of board<br />
Locking Lever<br />
• Flip up lever 90<br />
degrees for removal.<br />
• Sl<strong>id</strong>e connector into<br />
receptacle on same<br />
horizontal plane as<br />
board.<br />
• Lock down lever after<br />
inserting cable.<br />
Examples:<br />
• IR/SIL flex cable<br />
• keyboard backlight flex<br />
cable<br />
• Express Card cable<br />
2010-06-11<br />
General Information<br />
Connector Types on Logic Board<br />
On the logic board are six types of connectors, each requiring special handling. Make sure you<br />
read these tips before disconnecting and installing the connectors.<br />
<strong>MacBook</strong> <strong>Pro</strong> (<strong>17</strong>-<strong>inch</strong>, <strong>Early</strong> <strong>2009</strong>) Take Apart — General Information 113
Change language