Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au

Replacement
Caution: Plug in a
disconnected adapter
cable.
1 Making sure power is
cut off, install MagSafe
board screws.
2 Test port alignment
by plugging in power
cable from 4 angles.
• If port is off center
and cable does not
seat securely, loosen
MagSafe screws,
realign port with
cable in place, and
secure screws.
• If port seats correctly,
continue.
3 Connect MagSafe
cable to logic board.
4 Install logic board and
remaining parts.
5 With computer fully
assembled, test power
with power cable.
2010-06-11
MacBook Pro (17-inch, Early 2009) Take Apart — MagSafe Board 199