29.03.2013 Views

Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au

Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au

Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Tools<br />

Clean, soft, lint-free cloth<br />

• ESD wrist strap and<br />

mat<br />

• Magnetized Phillips<br />

#00 screwdriver<br />

• Torx T6 screwdriver<br />

Removal<br />

1 With a black stick,<br />

carefully pry optical<br />

cable straight up and<br />

off logic board.<br />

Important<br />

Replacement Note:<br />

Install flex cable<br />

vertically onto logic<br />

board connector. If<br />

not, logic board pins<br />

could bend, c<strong>au</strong>sing<br />

an undetected disc<br />

symptom.<br />

2 Remove 4 screws:<br />

• 1 Torx T6 (3.1-mm)<br />

922-xxxx at top case<br />

boss<br />

• 3 Phillips #00 (3.5mm)<br />

922-8719 at<br />

optical drive<br />

3 Disconnect remaining<br />

cables:<br />

• Bluetooth antenna<br />

• Camera cable (2)<br />

2010-06-11<br />

<strong>MacBook</strong> <strong>Pro</strong> (<strong>17</strong>-<strong>inch</strong>, <strong>Early</strong> <strong>2009</strong>) Take Apart — Optical Drive 150

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!