Apple Technician Guide MacBook Pro (17-inch, Early 2009) - tim.id.au

Replacement
Important: Before
returning a display
assembly, be sure to
• remove clutch cover
• remove AirPort Card
and transfer it to the
new display assembly
• reinstall clutch cover
• remove and transfer
the protective film
from the replacement
display to the
defective display
Important: Before
installing a new display
assembly, be sure to install
the AirPort Card. With the
computer assembled, test
the AirPort card for normal
operation.
Aligning Display to
Top Case
1 Place the display
on the foam wedge
service fixture.
2 Install only the center
screws:
3 Move computer from
wedge, and carefully
close display.
2010-06-11
MacBook Pro (17-inch, Early 2009) Take Apart — Display Assembly 166