Owner's Manual - Roland

MFX1–3 Output
(Multi-Effects 1–3 Output)
7
8
9
MFX Output Level
(Multi-Effects Output Level)
Adjusts the volume of the sound that has passed through the
multi-effects.
Value: 0–127
MFX Chorus Send Level
(Multi-Effects Chorus Send Level)
Adjusts the amount of chorus for the sound that passes
through multi-effects. If you don’t want to add the Chorus
effect, set it to “0.”
Value: 0–127
MFX Reverb Send Level
(Multi-Effects Reverb Send Level)
Adjusts the amount of reverb for the sound that passes
through multi-effects. If you don’t want to add the Reverb
effect, set it to “0.”
Value: 0–127
Chorus
10
Chorus Type
Selects either chorus or delay.
Value
0 (Off): Neither chorus or delay is used.
1 (Chorus): Chorus is used.
2 (Delay): Delay is used.
3 (GM2 Chorus): General MIDI 2 chorus
Chorus Output
11
12
Chorus Output Level
Adding Effects
Adjusts the volume of the sound that has passed through
chorus.
Value: 0–127
Chorus Output Select
Specifies how the sound routed through chorus will be
output.
Value
MAIN: Output to the OUTPUT jacks in stereo.
REV: Output to reverb in mono.
M+R: Output to the OUTPUT jacks in stereo, and to
reverb in mono.
Reverb
13
Reverb Type
Selects the type of reverb.
Value
0 (Off): Reverb is not used.
1 (Reverb): Normal reverb
2 (SRV Room): This reverb simulates typical room
acoustic reflections.
3 (SRV Hall): This reverb simulates typical concert hall
acoustic reflections.
4 (SRV Plate): This reverb simulates a reverb plate, a
popular type of artificial reverb unit that
derives its sound from the vibration of a
metallic plate. You can also achieve
unusual metallic-sounding reverbs using
“SRV Plate.”
5 (GM2 Reverb): General MIDI 2 reverb
147
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix