Owner's Manual - Roland

JOG/SHUTTLE/CURSOR Section
Edit Mode
62
Edit mode lets you use the Jog/Shuttle wheel and cursor buttons to nudge the selected data, apply clip fades and
crop clip edges.
To Enable Editing with the Jog/Shuttle Wheel
1. Make a selection (see “To enable Select by Time mode (default)” (p. 61)).
2. Press the [EDIT] button.
To Crop the Selected Clip(s)
1. Select a clip by using the Free Edit Tool (see “Select Mode” (p. 61)).
2. Press the [EDIT] button.
3. Do one of the following:
• To crop the left clip edge, press the [ ] button in the RECORD/EDIT section.
• To crop the right clip edge, press the [ ] button in the RECORD/EDIT section.
The [ ] or [ ] button is lit to indicate Crop edit mode.
4. Turn the Jog or Shuttle wheel.
5. When you are finished editing, press the [EDIT] button again to exit Edit mode.
To Fade the Selected Clip(s)
1. Select a clip by using the Free Edit Tool (see “Select Mode” (p. 61)).
2. Press the [EDIT] button.
3. Do one of the following:
• To fade the left clip edge, hold down the [SHIFT] modifier button and press the [ ] button in the RECORD/EDIT
section.
• To fade the right clip edge, hold down the [SHIFT] modifier button and press the [
section.
] button in the RECORD/EDIT
The [ ] or [ ] button blinks to indicate Fade edit mode.