Owner's Manual - Roland
Owner's Manual - Roland
Owner's Manual - Roland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CHANNEL STRIP Section<br />
Strip Select (SEL)<br />
fig.4.eps<br />
36<br />
Use the [SEL] button to activate the CHANNEL STRIP CONTROL section for the selected channel, which allows you to<br />
control EQ and Send parameters for that channel.<br />
The eight [SEL] buttons are mutually exclusive, so only one channel at a time can be selected. When enabled, the<br />
[SEL] button stays lit.<br />
The modifier buttons (p. 67) can be used to extend the functions as follows.<br />
The [SEL] button is not bi-directional. Changing the current track in SONAR will not change the selected<br />
channel on the VS-700C Console.<br />
Button Explanation<br />
Default (no modifier button)<br />
CTRL+SEL<br />
SHIFT+SEL<br />
COMMAND+SEL<br />
Activates the CHANNEL STRIP CONTROL section for the selected channel. Also<br />
sets the current track in SONAR if FADER VIEW is assigned to TRACK.<br />
Enable Plug-in mode. For more information, refer to “Controlling Plug-ins<br />
from the VS-700C Console” (p. 74).<br />
Locks/unlocks the channel strip to the corresponding track/bus in SONAR.<br />
(p. 46)<br />
Toggles a global enable state for locking. If you have strips locked, you can<br />
disable and re-enable locking and the same strips will be locked.