Owner's Manual - Roland

Adding Effects
Chorus Source
150
Selects the chorus parameter settings that will be used by the
performance. If you wish to use the performance settings,
select “PRF.” If you wish to use the settings of the patch/
rhythm set assigned to one of the parts, select the part
number.
Value: PRF, P1–P16
When Patch or Rhythm Set Settings Are Selected
When the patch or rhythm set’s chorus settings are
selected, those settings are shown in each of the
performance’s chorus setting screens, and the settings
can be then be changed as well. Changes to patch or
rhythm set chorus parameter settings are lost when
another patch or rhythm set is selected. To keep the
modified settings, save the settings.
Reverb Source
Selects the reverb parameter settings that will be used by the
performance. If you wish to use the performance settings,
select “PRF.” If you wish to use the settings of the patch/
rhythm set assigned to one of the parts, select the part
number.
Value: PRF, P1–P16
When Patch or Rhythm Set Settings Are Selected
When the patch or rhythm set’s reverb settings are
selected, those settings are shown in each of the
performance’s reverb setting screens, and the settings
can be then be changed as well. Changes to patch or
rhythm set reverb parameter settings are lost when
another patch or rhythm set is selected. To keep the
modified settings, save the settings.
Specifying the multi-effect structure
(MFX Structure)
Here’s how to specify how MFX 1–3 will be connected.
MFX Structure (MFX Structure Type)
Specify how MFX1–3 will be connected.
Value: Type 01–Type 16