Owner's Manual - Roland
Owner's Manual - Roland
Owner's Manual - Roland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
To Specify the Loop Region<br />
1. Select transport mode (p. 58).<br />
RECORD/EDIT Section<br />
2. Hold down the [SHIFT] button and press the [LOOP] button. The [LOOP] and [ ] buttons will<br />
blink.<br />
3. Use the jog/shuttle and cursor to move to the loop-start point.<br />
4. Press the [ ] button. The [LOOP] and [ ] buttons will blink.<br />
5. Use the jog/shuttle and cursor to move to the loop-end point.<br />
6. Press the [LOOP] button.<br />
To Insert a Marker<br />
1. Use the jog/shuttle and cursor to move to the time at which you want to insert a marker.<br />
2. Press the [MARKER] button.<br />
3. The marker dialog box will appear.<br />
4. As desired, edit the name, the time, and the groove clip pitch.<br />
5. Press the [OK/ENTER] button.<br />
To Access the Marker View<br />
1. Hold down the [COMMAND] button and press the [MARKER] button.<br />
2. The marker view will appear.<br />
To View Marker Information in the Console<br />
1. Hold down the [SHIFT] button and press the [MARKER] button.<br />
2. Marker information will appear in the console.<br />
73<br />
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix